Pilot Valve (Travel) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 6V-0006     | 接头钳     | 1     |
开始:
- 拆下先导阀。 请参阅拆解和组装, "先导阀(行驶)- 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这将防止脏污进入内部机构。
注: 在先导阀拆解期间,在每个部件上作识别标记以便于组装。
Show/hide table
图 1 | g00704366 |
图示中未显示接头。 |
- 从先导阀拆下接头 (37) 。
Show/hide table
图 2 | g01021619 |
- 从接头 (37) 上拆下 O 形密封圈 (38) 和 (39) 。
Show/hide table
图 3 | g00711962 |
- 从踏板上拆下调整螺钉 (6) 和凸轮轴 (19) 。
Show/hide table
图 4 | g00711974 |
- 从先导阀上拆下踏板 (12) 。
Show/hide table
图 5 | g00711976 |
- 拆下螺母 (17) 和调整螺钉 (5) 。
Show/hide table
图 6 | g01021620 |
- 对于其余的踏板重复进行步骤3 至5。
- 拆下螺栓 (4) 和盖 (24) 。
Show/hide table
图 7 | g01021621 |
- 将衬套 (20) 从盖 (24) 上拆下。
Show/hide table
图 8 | g01021622 |
- 拆下螺栓 (26) 和盖 (25) 。
Show/hide table
图 9 | g01021623 |
- 使用工具 (A) 将螺塞 (8) 和推杆从阀体组件上拆下。
Show/hide table
图 10 | g00712108 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将活塞 (18) 从推杆 (16) 上拆下。
Show/hide table
图 11 | g00712111 |
- 将推杆 (16) 从螺塞 (8) 上拆下。
- 从螺塞 (8) 上拆下 O 形密封圈 (11) 和盖 (2) 。
Show/hide table
图 12 | g00712118 |
- 将密封件 (3) 从螺塞 (8) 上拆下。
Show/hide table
图 13 | g00712119 |
- 拆下外弹簧 (23) 和内弹簧 (22) 。
Show/hide table
图 14 | g00712122 |
- 拆下弹簧座 (27) 。
Show/hide table
图 15 | g00712126 |
- 拆下滚珠 (33) 。
Show/hide table
图 16 | g01021624 |
- 对衬套 (34) 施加压力。
Show/hide table
图 17 | g00712130 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下挡圈 (32) 。
- 缓慢地释放衬套 (34) 上的压力。
- 取下衬套 (34) 。
Show/hide table
图 18 | g00712136 |
- 拆下滑阀组件 (15) 。
Show/hide table
图 19 | g00712139 |
- 使用以下步骤拆解滑阀组件 (15) 。
- 用手对阀座 (1) 施加压力。 将滑阀 (14) 的一端放在阀座 (1) 的槽形开口中。 拆下阀座 (1) 。
Show/hide table图 20 g00712141
Show/hide table被弹簧力爆出的零件击中,会招致人员伤害。
确保穿上所有必要的保护装备。
遵照建议的程序,并使用所有建议的工具以释放弹簧力。
- 将弹簧 (7) 从滑阀 (14) 上拆下。
- 将垫圈 (9) 、 (10) 和 (13) 从滑阀 (14) 上拆下。
- 拆下弹簧 (21) 。
Show/hide table
图 21 | g00712165 |
- 重复步骤 10 到 24 以便拆下其余三个滑阀组件。
- 将螺塞 (31) 从阀体组件 (35) 上拆下。
Show/hide table
图 22 | g01021626 |
- 将 O 形密封圈 (30) 从螺塞 (31) 上拆下。
Show/hide table
图 23 | g00712173 |
- 将阀座 (29) 、滚珠 (28) 和螺塞 (36) 从阀体组件 (35) 上拆下。
Show/hide table
图 24 | g00712178 |
Caterpillar Information System:
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Refrigerant Receiver-Dryer - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Refrigerant Condenser - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Switches
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Muffler - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fuel Filter and Base - Remove and Install - Secondary
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Ether Start Valve - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Engine Electronic Control - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Electric Starting Motor - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Battery - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Alternator - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Air Cleaner - Remove and Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (Machine)
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
374D and 390D Excavators Machine Electronic Control System Pedal Control
416E Backhoe Loader Extendable Stick Pads - Inspect/Adjust - If Equipped
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Sensors
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Manual Valve (Auxiliary Shutoff) - Install
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Solenoids
320D and 323D Excavators Hydraulic System Engine Performance - Test - Engine Speed
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Related Components
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Accumulator - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Manual Ball Valve (Counterweight Circuit) - Remove
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System General Information