301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Caterpillar

Caterpillar Approved Work Tools

Usage:

The following work tools have been approved by Caterpillar. Refer to the owner's manual and the service manual for each work tool for proper operation, maintenance, and servicing of the work tools.

Show/hide table

Table 1
Caterpillar Approved Work Tools for Mini Hydraulic Excavators
Work Tool	Machine
Work Tool	301.6C	301.8C	302.5C
A7	X	X	X
A7B	X	X	X
A13			X
H45	X	X	X
H45s	X	X	X
H50			X
H50s			X
H55Ds			X
Hydraulic Ditch Cleaning Bucket	X	X	X

The use of hammers shortens the life of hydraulic oil. If a hammer is used, the following measures should be taken:

Shorten the interval for changing the hydraulic oil to 1500 service meter hours.
Use SAE 30 hydraulic oil or 15w40 hydraulic oil in order to sustain seal life.

This list was completed at the time of publication. There may be additional work tools that have been approved since that time. Consult your Caterpillar dealer for an updated list of approved work tools.

INTENDED USE STATEMENT for the Hydraulic Ditch Cleaning Bucket

This Work Tool has the intended functions of digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel.

Do not use the work tool improperly.

Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.

Caterpillar Information System:

320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1523 - FMI 03

325C Excavator Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install

M313C Wheeled Excavator Power Train Axle Housing - Install - Front

M313C Wheeled Excavator Power Train Axle Housing - Remove - Front

302.5C Mini Hydraulic Excavator Machine Systems Pump Drive Coupling - Remove and Install

568 Forest Machines Machine Systems Swing Cushion Valve - Assemble

568 Forest Machines Machine Systems Swing Cushion Valve - Disassemble

345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Assemble

345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Motor - Disassemble

301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Cooling System Coolant Sample - Obtain

385C Material Handler Hydraulic System Swing Speed and Overswing on Level Ground - Check

365C Excavator Engine Supplement Fan - Remove and Install

365C Excavator Engine Supplement Fan Drive - Remove

365C Excavator Engine Supplement Fan Drive - Install

330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Disassemble

330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement Fan Drive - Assemble