Condenser (Refrigerant) - Clean
Show/hide table
| 注意 |
|---|
如果冷凝器很脏，则要用刷子清洁。 为了防止冷凝器散热片损坏或弯折，决不能使用硬刷子。 如果冷凝器散热片有缺陷，要进行修理。 |
- 打开机器左侧的检视盖。
- 检查冷凝器有无碎屑。 必要时要清洁冷凝器。
Show/hide table
 | |
| 图 1 | g00537515 |
典型实例 | |
- 可以使用压缩空气、高压水或水蒸汽清除冷凝器的灰尘和其它碎屑。 但优先使用压缩空气。
- 关闭机器左检视门。
Caterpillar Information System:
305.5 Mini Hydraulic Excavator Circuit Breakers - Reset
305.5 Mini Hydraulic Excavator Blade Linkage - Lubricate
305.5 Mini Hydraulic Excavator Capacities (Refill)
325C LCR Excavator Hydraulic System Solenoid Valve (Proportional Reducing) - Power Shift System
315C Excavator Machine System Specifications Track
BR160, BR166, BR172, BR272 and BR378 Brush Cutters Frame Mounting Bracket - Inspect
305.5 Mini Hydraulic Excavator Access Door and Cover Locations
365B Series II Excavator Maintenance Interval Schedule
345B Series II Excavator Maintenance Interval Schedule
325C LCR Excavator Hydraulic System Gear Pump (Pilot)
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers User Defined Shutdown Input Circuit - Test
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Specifications
305.5 Mini Hydraulic Excavator Cooling System Coolant (ELC) - Change
305.5 Mini Hydraulic Excavator Cooling System Coolant Extender (ELC) - Add
305.5 Mini Hydraulic Excavator Cooling System Coolant Level - Check
305.5 Mini Hydraulic Excavator Cooling System Coolant Sample (Level 1) - Obtain
325C LCR Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
345C Excavator Tool Control System System 15: Default Value of Work Tool Parameters
345C Excavator Tool Control System System 15: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
BR160, BR166, BR172, BR272 and BR378 Brush Cutters Operation
325C LCR Excavator Hydraulic System Oil Makeup (Swing System)
302.5C Mini Hydraulic Excavator Machine System Specifications Travel Motor
305.5 Mini Hydraulic Excavator Engine Air Filter Element - Clean/Replace
305.5 Mini Hydraulic Excavator Engine Oil Level - Check