Magnetic Pickup
Usage:
Distance between end of magnetic pickup and gear ... 0.56 to 0.84 mm (.022 to .033 in)
NOTE: This distance is set by turning magnetic pickup into threads until magnet is against the gear tooth while the engine is stopped. Now back magnetic pickup out 180 ± 15 degrees.
Tighten nut to a torque of ... 45 ± 7 N·m (33 ± 5 lb ft)
Caterpillar Information System:
3306B GENERATOR SET ENGINE Shutoff Solenoid Energized To Run
3306B GENERATOR SET ENGINE Switches
3306B GENERATOR SET ENGINE Sending Units
3306B GENERATOR SET ENGINE Sensors
3306B GENERATOR SET ENGINE Digital Tachometer
3306B GENERATOR SET ENGINE Tachometer Calibration Chart
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Alternator And Regulator
3306B GENERATOR SET ENGINE Flywheel Housing
3306B GENERATOR SET ENGINE Flywheel
3306B GENERATOR SET ENGINE Engine Front Support
3306B GENERATOR SET ENGINE Crankshaft Pulley
3306B GENERATOR SET ENGINE Jacket Water Heater
3306B GENERATOR SET ENGINE Ether Atomizer Assembly
3306B GENERATOR SET ENGINE Ether Start Valve Assembly
3306B GENERATOR SET ENGINE Indicators
3306B GENERATOR SET ENGINE Heat Exchanger Group (If Equipped)
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Testing & Adjusting
3306B GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Air Filter Elements
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Control Panel