Engine Oil Cooler - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | -     | 导向螺栓 (8 mm ×1.25 mm × 40 mm)     | 2     |
开始:
- 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 排放冷却系统中的冷却液到适当的容器中。 冷却系统的容量为 30 L (7.9 美制加仑)。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
- 断开线束组件 (4) 。 拆下两颗螺栓 (2) 并安装工具 (A) 。 拆下其余的螺栓 (2) 。 拆下壳体 (3) 和发动机机油冷却器 (1) 。
Show/hide table
图 1 | g00983857 |
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | -     | 导向螺栓 (8 mm ×1.25 mm × 40 mm)     | 2     |
- 将发动机机油冷却器 (1) 和壳体 (3) 定位到工具 (A) 上。 安装其余的螺栓 (2) 。 拆下工具 (A) 并安装两颗螺栓 (2) 。 连接软管 (4) 。
Show/hide table
图 2 | g00983857 |
- 向冷却系统加注冷却液。 冷却系统的容量为 30 L (7.9 美制加仑)。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
End By: 安装涡轮增压器。 请参阅 拆解和组装, "涡轮增压器 - 安装"。
Caterpillar Information System:
314C ExcavatorEngine Supplement Oil Pan - Remove and Install
320C Excavator Machine System Specifications Solenoid Valve (Quick Coupler)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Assemble
C-10, C-12, C-15 and C-16 Industrial Engines CID 0247 FMI 09 J1939 Data Link communications
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Assemble
C4.4 Industrial Engine Piston Ring Groove - Inspect
C4.4 Industrial Engine Cooling System - Inspect
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Engine Enclosure Group - Remove and Install
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Disassemble
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Disassemble
M318C Excavator Hydraulic System Relief Valve (Medium Pressure/Cab Riser Function) - Test and Adjust
M318C Excavator Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1a: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1b: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1c: Relief Valve (Line) - Test and Adjust - One-Way System
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Frame Slide Bars - Lubricate
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
2003/04/01 New Flash File Software Is Used for Product Link 151/201 {7620}
BP24 Pickup Broom Broom Brush
BP24 Pickup Broom Broom Hitch
BP24 Pickup Broom Debris Frame
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
312C and 315C Excavators Tool Control System System G14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Piston Motor - Install