Stick
Show/hide table
Illustration 1 | g00878794 |
(1) Lubricate the sealing lip lightly with the lubricant that is being sealed.
(2) 128-9863 Sleeve Bearing
- Outside diameter ... 106.200 ± .013 mm (4.1811 ± 0.0005 inch)
- Inside diameter ... 90.27 ± .02 mm (3.5539 ± 0.0008 inch)
(3) 121-8702 Pin As
- Diameter after plating ... 99.850 ± .040 mm (3.9311 ± 0.0016 inch)
- Thickness of plating ... 0.005 mm (0.0002 inch)
(4) Use the necessary shims in order to adjust the lateral clearance:
- Lateral clearance ... 1.6 mm (0.06 inch)
- 093-0090 Shim ... 1.0 mm (0.04 inch)
- 7Y-3355 Shim ... 1.6 mm (0.06 inch)
- 093-0122 Shim ... 2.0 mm (0.08 inch)
- 093-0090 Shim ... 1.0 mm (0.04 inch)
(7) 128-9882 Sleeve Bearing
- Outside diameter ... 106.200 ± .013 mm (4.1811 ± 0.0005 inch)
- Inside diameter ... 90.27 ± .02 mm (3.5539 ± 0.0008 inch)
Caterpillar Information System:
365B and 365B Series II Excavators Hydraulic System Main Control Valve - True Load Signal
318C and 319C Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
365B and 365B Series II Excavators Hydraulic System Main Hydraulic System - True Load Signal
318C Excavator Machine System Specifications Boom Cylinder Lines - Right Hand
318C Excavator Hydraulic System Cylinder Speed - Check
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Engine Starting with Jump Start Cables
325C Forest Machine Machine System Specifications Stick
S440, S465 and S490 Straight Shears Wear Plates - Remove and Install
330C Excavator Machine Systems Fuel Tank - Install
318C Excavator Machine System Specifications Boom Cylinder Lines - Left Hand
S305, S320, S325, S340, S365 and S390 Demolition and Scrap Shears Wear Plates - Remove and Install
319D Excavator Machine System Specifications Boom Cylinder Lines
307C Excavator Machine Systems Heating and Air Conditioning Unit - Remove
318C and 319C Excavators Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
2002/09/02 Procedure for the Installation of the Product Link {7602, 7610, 7620}
385B and 5090B Excavators Excavator Systems Boom - Remove
307C Excavator Machine Systems Swing Drive - Install
325C Excavator Engine Oil and Filter - Change
325C Excavator Machine System Specifications Bucket Cylinder
307C Excavator Machine Systems Heating and Air Conditioning Unit - Install
318C and 319C Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
318C and 319C Excavators Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
318C and 319C Excavators Hydraulic System Relief Valve (Crossover) - Test and Adjust
303 CR Mini Hydraulic Excavator Hydraulic System Relief Valve (Main) - Test and Adjust