Specifications
Specifications
Show/hide table
Illustration 1 | g00842776 |
Show/hide table
Specifications for the Shears     | |||
---|---|---|---|
    | S440     | S465     | S490     |
Height (H)     | 3245 mm (127.8 inch)     |
3890 mm (153.1 inch)     |
4530 mm (178.3 inch)     |
Depth (D)     | 1507 mm (59.3 inch)     |
1810 mm (71.3 inch)     |
2120 mm (83.5 inch)     |
Width     | 1010 mm (39.8 inch)     |
1180 mm (46.5 inch)     |
1400 mm (55.1 inch)     |
Opening of the Jaw (A)     | 620 mm (24.4 inch)     |
800 mm (31.5 inch)     |
1000 mm (39.4 inch)     |
Depth of the Jaw (B)     | 680 mm (26.8 inch)     |
830 mm (32.7 inch)     |
1020 mm (40.2 inch)     |
Weight (1)     | 3700 kg (8157.1 lb)     |
5550 kg (12235.6 lb)     |
8000 kg (17637.0 lb)     |
Closing force at the rear of the cutter     | 7300 kN (820 ton)     |
9850 kN (1107 ton)     |
12600 kN (1416 ton)     |
Maximum Hydraulic System Back Pressure     | 5000 kPa (725 psi)     |
5000 kPa (725 psi)     |
5000 kPa (725 psi)     |
Recommended Internal Diameter of the Hydraulic Lines for the Jaws     | 32 mm (1.25 inch)     |
40 mm (1.5 inch)     |
50 mm (2 inch)     |
Show/hide table
( 1 ) | The weight does not include the mounting bracket. |
Show/hide table
Specifications for the Jaws of the Shears     | |||
    | S440     | S465     | S490     |
Operating Pressure     | 35000 kPa (5076 psi)     |
35000 kPa (5076 psi)     |
35000 kPa (5076 psi)     |
Optimum Hydraulic Oil Flow     | 300 L/min (80 US gpm)     |
400 L/min (105 US gpm)     |
800 L/min (210 US gpm)     |
Shear Capacity
The following table provides an overview of the profiles of steel that can be cut by the shear. The profiles are the most common profiles. The profiles are made of Fe360 (ASTM 283C) steel.
The dimensions of the profiles are the maximum dimension that can be safely cut. Consult your Caterpillar dealer before you cut materials that are larger than the dimensions in the table. Consult your Caterpillar dealer before you cut steel that has a rating that is higher than Fe510 (ASTM A572Gr50).
Show/hide table
Capacity of the Shear     | |||
---|---|---|---|
    | S440     | S465     | S490     |
Square bar (mm)     | 90 x 90     | 100 x 100     | 115 x 115     |
Round bar (mm)     | Ø100     | Ø110     | Ø130     |
L-bar (mm)     | 250 x 250 x 25     | 250 x 250 x 30     | 300 x 300 x 25     |
U-beam UNP     | 450     | 450     | 450     |
I-beam INP / IPE     | 400 / 550     | 450 / 600     | 450 / 600     |
H-beam HE-A / HE-B / HE-M     | 340 / 260 / 160     | 450 / 300 / 180     | 500 / 340 / 200     |
Caterpillar Information System:
330C Excavator Machine System Specifications Pump Coupling
385B Excavator Machine System Specifications Control Valve (Main)
M318C Excavator Hydraulic System Brake Control Valve (Service) - Adjust
312C Excavator Hydraulic System General Information
2001/11/12 Correction to Disassembly and Assembly , "Counterweight" {7050, 7056}
385B and 5090B Excavators Excavator Systems Gear Pump (Pilot) - Disassemble
330C Forest Machine Machine System Specifications Control Valve (Main)
330C Excavator Tool Control System System 11: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
2001/11/19 A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
385B Excavator Boom/Stick/Bucket Combinations
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Stick Lines
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Stick Lines
M318C Excavator Hydraulic System Control Valve (Boom Lowering) - Test and Adjust
3126B Engine for Caterpillar Built Machines Injector Solenoid Circuit - Test
M318C Excavator Hydraulic System Control Valve (Stick Lowering) - Test and Adjust
385B Excavator Hydraulic System Margin Pressure - Test and Adjust
325D and 329D Excavators Machine System Specifications Pilot Valve
385B Excavator Hydraulic System Main Pump (Flow) - Test - Constant Horsepower Flow Control
385B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
385B Excavator Hydraulic System Piston Pump (Swing) - Test - Constant Horsepower Flow Control
385B Excavator Hydraulic System Piston Pump (Swing) - Test - Positive Flow Control
385B Excavator Hydraulic System Gear Pump (Pilot) - Test
385B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
385B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil