Fuel Tank - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 4 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach Tooling (A) and a suitable lifting device to fuel tank (29). The weight of fuel tank (29) is approximately 99 kg (218 lb). Position fuel tank (29) on the excavator.
Show/hide table
 | |
| Illustration 1 | g01013233 |
Show/hide table
 | |
| Illustration 2 | g00802931 |
- Install spacers (28) and bolts (27) in order to secure fuel tank (29) to the excavator.
- Install the fuel supply hose on valve assembly (23). Tighten hose clamp (24). Install clip (26) and nut (25) .
Show/hide table
 | |
| Illustration 3 | g00802915 |
- Install door assembly (22). Install the bolts that secure door assembly (22) to the excavator.
Show/hide table
 | |
| Illustration 4 | g00802874 |
- Install the hose on the fuel tank and tighten hose clamp (21). Install clip (20) and nut (19) .
Show/hide table
 | |
| Illustration 5 | g01004136 |
- Install sleeves (17), bracket (18), and bolts (16) .
Show/hide table
 | |
| Illustration 6 | g00802863 |
- Install cover (15) and bolts (14) .
Show/hide table
 | |
| Illustration 7 | g00802833 |
- Install the storage box. Install bolts (13) and (12) and bolt assembly (11) .
Show/hide table
 | |
| Illustration 8 | g00802787 |
- Place the vandalism guards in the storage box and install storage box cover (10) .
Show/hide table
 | |
| Illustration 9 | g00802754 |
- Connect harness assemblies (7) and (8). Install cable straps (9) .
Show/hide table
 | |
| Illustration 10 | g00823048 |
- Position the solenoid valve and install bolts (6) .
Show/hide table
 | |
| Illustration 11 | g00823041 |
- Connect harness assembly (4) to the fuel level sensor and install cable strap (5) .
Show/hide table
 | |
| Illustration 12 | g00822987 |
- Install hood covers (3) and (2) .
Show/hide table
 | |
| Illustration 13 | g00828908 |
- Install plate (1) .
Show/hide table
 | |
| Illustration 14 | g00822953 |
Caterpillar Information System:
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 147-9437 Generator through 147-9497 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1811 Generator through 144-1951 Generator
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Swing Lock Pin Control
312C Excavator Machine Systems Fuel Tank - Remove
325C Excavator Machine System Specifications Swing Gear and Bearing
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Securing the Machine
Procedure to Reinforce the Frame Assembly Stabilizer{7222} Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Temperature Sensor Open or Short Circuit - Test
312C Excavator Machine Systems Accumulator - Remove and Install
325D MHPU Mobile Hydraulic Power Unit Machine System Specifications Fasteners - Swing Drive
320B Excavator Machine System Specifications Front Idler
325C Excavator Machine System Specifications Recoil Spring
305 CR Mini Hydraulic Excavator Access Door and Cover Locations
312C Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
325C Excavator Machine System Specifications Track Roller (Single Flange)
305 CR Mini Hydraulic Excavator Capacities (Refill)
330B Excavator Machine System Specifications Track Carrier Roller
PM820, PM822, and PM825 Cold Planer Leaving the Machine
2002/03/18 A New Cylinder Head Gasket Is Available For Service Replacement {1124}
305.5 Mini Hydraulic Excavator Battery - Clean
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Battery Hold-Down - Tighten