Fuel Tank - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 4     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove plate assembly (1) .
Show/hide table
Illustration 1 | g00822953 |
- Remove hood covers (2) and (3) .
Show/hide table
Illustration 2 | g00828908 |
- Disconnect harness assembly (4) from the fuel level sensor and cut cable strap (5) .
Show/hide table
Illustration 3 | g00822987 |
- Remove bolts (6) and move the solenoid valve group away from the fuel tank.
Show/hide table
Illustration 4 | g00823041 |
- Disconnect harness assemblies (7) and (8). Cut cable straps (9) .
Show/hide table
Illustration 5 | g00823048 |
- Remove storage box cover (10) and the vandalism guards from the storage box.
Show/hide table
Illustration 6 | g00802754 |
- Remove bolt assembly (11) and bolts (12) and (13). Remove the storage box.
Show/hide table
Illustration 7 | g00802787 |
- Remove bolts (14) and cover (15) .
Show/hide table
Illustration 8 | g00802833 |
- Remove bolts (16), bracket (18), and sleeves (17) .
Show/hide table
Illustration 9 | g00802863 |
- Remove nut (19) and clip (20). Loosen clamp (21) and remove the hose from the fuel tank.
Show/hide table
Illustration 10 | g01004136 |
- Remove the bolts that fasten door assembly (22) to the machine.
Show/hide table
Illustration 11 | g00802874 |
- Close valve assembly (23) for the fuel supply hose. Loosen clamp (24) and remove the hose from the valve assembly. Remove nut (25) and clip (26) .
Show/hide table
Illustration 12 | g00802915 |
- Attach Tooling (A) and a suitable lifting device to fuel tank (29) .
Show/hide table
Illustration 13 | g01013233 |
Show/hide table
Illustration 14 | g00802931 |
- Remove bolts (27) and spacers (28) which secure fuel tank (29) to the excavator.
- Remove fuel tank (29). The weight of fuel tank (29) is approximately 99 kg (218 lb).
Caterpillar Information System:
325C Excavator Machine System Specifications Swing Gear and Bearing
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Securing the Machine
Procedure to Reinforce the Frame Assembly Stabilizer{7222} Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Temperature Sensor Open or Short Circuit - Test
312C Excavator Machine Systems Accumulator - Remove and Install
325D MHPU Mobile Hydraulic Power Unit Machine System Specifications Fasteners - Swing Drive
5230B Excavator Vital Information Management System (VIMS) Resettable Totals - Show
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM Attachment Code - Configure
5230B Excavator Vital Information Management System (VIMS) Service Operations
5230B Excavator Vital Information Management System (VIMS) Normal Operation
5230B Excavator Vital Information Management System (VIMS) General Information
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Swing Lock Pin Control
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1811 Generator through 144-1951 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 147-9437 Generator through 147-9497 Generator
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
312C Excavator Machine Systems Fuel Tank - Install
320B Excavator Machine System Specifications Front Idler
325C Excavator Machine System Specifications Recoil Spring
305 CR Mini Hydraulic Excavator Access Door and Cover Locations
312C Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
325C Excavator Machine System Specifications Track Roller (Single Flange)
305 CR Mini Hydraulic Excavator Capacities (Refill)