Window Washer Reservoir - Fill
Show/hide table
| NOTICE |
|---|
When operating in freezing temperatures, use Caterpillar or any commercially available nonfreezing window washer solvent. |
- Open the access door on the left side of the machine.
- Remove the filler cap.
Show/hide table
 | |
| Illustration 1 | g00786695 |
- Fill the window washer reservoir with washer fluid through the filler opening.
- Install the filler cap.
- Close the access door.
Caterpillar Information System:
314D Excavator Belts - Inspect/Adjust/Replace
P115, P120, P130 and P140 Mechanical Pulverizers Pins and Bushings - Inspect/Replace
311C Excavator Swing Gear - Lubricate
311C Excavator Swing Drive Oil Level - Check
322C Excavator Machine System Specifications Pump Coupling
311C Excavator Swing Drive Oil - Change
311C Excavator Radiator Core - Clean
BA22, BA25 and BA30 Angling Brooms Brushes - Remove and Install
311C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Boom
P115, P120, P130 and P140 Mechanical Pulverizers Reference Material
BA22, BA25 and BA30 Angling Brooms Brushes - Remove and Install
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
315C Excavator Hydraulic System Pilot Hydraulic System
315C Excavator Hydraulic System Main Hydraulic System
315C Excavator Hydraulic System Gear Pump (Pilot)
315C Excavator Hydraulic System Solenoid Valve (Hydraulic Activation)
315C Excavator Hydraulic System Solenoid Valve (Proportional Reducing)
315C Excavator Hydraulic System Cylinders (Boom, Stick and Bucket)
315C Excavator Hydraulic System Travel Hydraulic System
315C Excavator Hydraulic System Hydraulic Oil Cooler
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
5110B Excavator Machine Systems Swivel - Disassemble