Pump Coupling
Show/hide table
Illustration 1 | g00786592 |
(1) The pump coupling must be installed so that the coupling hub is flush with the end of the pump shaft.
(2) Torque for eight bolts ... 320 ± 10 N·m (236.0 ± 7.4 lb ft)
(3) Torque for two setscrews ... 110 ± 10 N·m (81.1 ± 7.4 lb ft)
Caterpillar Information System:
311C Excavator Swing Drive Oil - Change
311C Excavator Radiator Core - Clean
BA22, BA25 and BA30 Angling Brooms Brushes - Remove and Install
311C Excavator Machine System Specifications Auxiliary Hydraulic Lines - Boom
P115, P120, P130 and P140 Mechanical Pulverizers Reference Material
BA22, BA25 and BA30 Angling Brooms Brushes - Remove and Install
Product Identification Numbers (PIN) Location Guide Types of Labels and Plates
Product Identification Numbers (PIN) Location Guide Types of Identification Numbers
311C Excavator Hydraulic Tank Screen - Clean
320C, 322C and 325C Excavators Tool Control System System Identification
311C Excavator Machine System Specifications Stick - 2800 mm (9 ft 2 inch)
Product Identification Numbers (PIN) Location Guide General Information
311C Excavator Swing Drive Oil Level - Check
311C Excavator Swing Gear - Lubricate
P115, P120, P130 and P140 Mechanical Pulverizers Pins and Bushings - Inspect/Replace
314D Excavator Belts - Inspect/Adjust/Replace
311C Excavator Window Washer Reservoir - Fill
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
315C Excavator Hydraulic System Pilot Hydraulic System
315C Excavator Hydraulic System Main Hydraulic System
315C Excavator Hydraulic System Gear Pump (Pilot)
315C Excavator Hydraulic System Solenoid Valve (Hydraulic Activation)
315C Excavator Hydraulic System Solenoid Valve (Proportional Reducing)
315C Excavator Hydraulic System Cylinders (Boom, Stick and Bucket)