Crankshaft
Usage:
(1) Width of groove for ring in thrower ... .2515 ± .0005 in.(6.388 ± 0.013 mm)
Maximum permissible runout (axial eccentricity) of face of ring groove ... .002 in.(0.05 mm)
Clearance between ring and side of groove ... .0025 to .0045 in.(0.064 to 0.114 mm)
Put crankcase oil on ring and install ring word "OUT" away from crankshaft.
NOTE: Do not heat wear sleeves (A) to more than 300°F (149°C) before installation on the crankshaft.
(2) Before installation do not heat thrower or gear higher than maximum temperature of ... 300°F (149°C)
(3) End play for crankshaft ... .010 to .025 in.(0.25 to 0.64 mm)
NOTE: Make reference to Special Instruction SEHS6713 for procedures for crankshaft reconditioning.
Caterpillar Information System:
5.4" BORE, 60 V12 VEHICULAR ENGINE Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE pistons and rings
5.4" BORE, 60 V12 VEHICULAR ENGINE Cylinder Liner Projection
5.4" BORE, 60 V12 VEHICULAR ENGINE Cylinder Liner
5.4" BORE, 60 V12 VEHICULAR ENGINE Cylinder Block
5.4" BORE, 60 V12 VEHICULAR ENGINE Water Temperature Contactor Switches
5.4" BORE, 60 V12 VEHICULAR ENGINE Sending Units For Water Temperature
5.4" BORE, 60 V12 VEHICULAR ENGINE Gauges For Water Temperature
5.4" BORE, 60 V12 VEHICULAR ENGINE Mechanical Gauges For Water Temperature
5.4" BORE, 60 V12 VEHICULAR ENGINE Water Heater (An Attachment)
5.4" BORE, 60 V12 VEHICULAR ENGINE Fan Drive For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE Fan Drive For 992
5.4" BORE, 60 V12 VEHICULAR ENGINE Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE Connecting Rod Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE Vibration Damper (5S3419 and 2S712)
5.4" BORE, 60 V12 VEHICULAR ENGINE Vibration Damper (2N7221 and 4N4416)
5.4" BORE, 60 V12 VEHICULAR ENGINE Engine Support For 992, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Bore