Alternator
Show/hide table
Illustration 1 | g00620646 |
Front View of the 26-SI Alternator |
Show/hide table
Illustration 2 | g00620650 |
Side View of the 26-SI Alternator |
Show/hide table
Illustration 3 | g00620651 |
Rear View of the 26-SI Alternator |
Show/hide table
Specifications for 26-SI Alternators     | ||||
---|---|---|---|---|
Part Number Remanufactured Part Number     |
3E-7577 OR-3615     |
3E-7578 OR-5206     |
112-5041 OR-5206     |
3E-7892 OR-3616     |
Voltage Rating     | 24V     | 24V     | 24V     | 12V     |
Current     | 75A     | 50A     | 50A     | 85A     |
Application     | Extra Heavy Duty     | Extra Heavy Duty     | Heavy Duty     | Extra Heavy Duty     |
Weight     | 12.5 kg (27.6 lb)     | 12.5 kg (27.6 lb)     |
12.5 kg (27.6 lb)     |
12.5 kg (27.6 lb)     |
Polarity     | Negative Case Ground     | Negative Case Ground     | Negative Case Ground     | Negative Case Ground     |
Minimum Full Load Current (Cold) at 5000 rpm     | 67A     | 47A     | 47A     | 77A     |
Minimum Full Load Current (Cold) at 1500 rpm     | 29A (1) (2)     | 18A     | 18A     | 38A     |
Amperes at 27 °C (80 °F)and 1800 rpm     |
45     | 33     | 33     | 56     |
Amperes at 27 °C (80 °F) and 5000 rpm     |
75     | 50     | 50     | 85     |
Rotation (3)     | CW CCW     |
CW CCW     |
CW CCW     |
CW CCW     |
Show/hide table
( 1 ) | Minimum Full Load Current (Cold) at 2000 rpm |
( 2 ) | The minimum speed of the alternator should be 1800 rpm at low engine idle. |
( 3 ) | The rotation is viewed from the pulley. |
The results for a 12 volt 26-SI Alternator's rotor field winding test at 27 °C (80 °F) are in the following list:
- 3.0 to 4.3 Amperes
- 2.8 to 4.0 Ohms
The results for a 24 volt 26-SI Alternator's rotor field winding test at 27 °C (80 °F) are in the following list:
- 2.0 to 2.8 Amperes
- 8.5 to 12.0 Ohms
Show/hide table
Torque Specifications for the 26-SI Alternator     | ||||
---|---|---|---|---|
Part Number Remanufactured Part Number     |
3E-7577 OR-3615     |
3E-7578 OR-5206     |
112-5041 OR-5206     |
3E-7892 OR-3616     |
Pulley Nut     | 102 ± 7 N·m (75 ± 5 lb ft)     |
102 ± 7 N·m (75 ± 5 lb ft)     |
102 ± 7 N·m (75 ± 5 lb ft)     |
102 ± 7 N·m (75 ± 5 lb ft)     |
Cover for the Rectifier     | 5.3 N·m (47 lb in)     |
5.3 N·m (47 lb in)     |
5.3 N·m (47 lb in)     |
5.3 N·m (47 lb in)     |
Cover Plate Regulator and Mounting Plate Heat Sink     |
3 N·m (27 lb in)     |
3 N·m (27 lb in)     |
3 N·m (27 lb in)     |
3 N·m (27 lb in)     |
Battery Terminal     | 13.5 ± 1.3 N·m (119.5 ± 11.5 lb in)     |
13.5 ± 1.3 N·m (119.5 ± 11.5 lb in)     |
13.5 ± 1.3 N·m (119.5 ± 11.5 lb in)     |
13.5 ± 1.3 N·m (119.5 ± 11.5 lb in)     |
"R" Terminal Nut for the Regulator Stud     |
2 N·m (18 lb in)     |
2 N·m (18 lb in)     |
2 N·m (18 lb in)     |
2 N·m (18 lb in)     |
Nut for the Hex Mounting Bolt Bolt for the Adjusting Lug     |
88 N·m (65 lb ft)     |
88 N·m (65 lb ft)     |
88 N·m (65 lb ft)     |
88 N·m (65 lb ft)     |
Frame Bolts     | 6.2 N·m (55 lb in)     |
6.2 N·m (55 lb in)     |
6.2 N·m (55 lb in)     |
6.2 N·m (55 lb in)     |
Ground Screw     | 6 N·m (55 lb in)     |
6 N·m (55 lb in)     |
6 N·m (55 lb in)     |
6 N·m (55 lb in)     |
Show/hide table
Illustration 4 | g00620877 |
26-SI Alternator Schematic |
Caterpillar Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove
3512B Marine Auxiliary Engine Diesel Running Indicator
3054B Industrial Engine Safety Signs and Labels
3512B Marine Auxiliary Engine Air Starting Motor
3512B Marine Auxiliary Engine Engine Speed/Timing Sensor
C-15, C-16 and C-18 Truck Engines Accessory Drive - Disassemble
3406E Marine Engine Engine Oil Pressure
Electronic Modular Control Panel II (EMCP II) For MUI Engines Erratic GSC Operation - Troubleshoot
C-15, C-16 and C-18 Truck Engines Accessory Drive - Install
3512B Marine Auxiliary Engine Engine Sensor Open/Short Test
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Install
3512B Marine Auxiliary Engine Permanent Timing Calibration Sensor
26SI Series Alternator General Information
C-15, C-16 and C-18 Truck Engines Accessory Drive - Assemble
3512B Marine Auxiliary Engine Low RPM Indicator
Electronic Modular Control Panel II (EMCP II) For MUI Engines Schematics and Wiring Diagrams
3406E On-Highway Engine Engine Support (Front) - Remove and Install
26SI Series Alternator Component Description
3406E, C-10, C-12, C-15, C-16 Truck Engines Serial Number Plate
3406E On-Highway Engine Fuel Temperature Sensor - Remove and Install
3406E On-Highway Engine Atmospheric Pressure Sensor - Remove and Install
3406E On-Highway Engine Inlet Air Temperature Sensor - Remove and Install