Accessory Drive - Disassemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 2P-8312 | Retaining Ring Pliers | 1 |
B | 8H-0663 | Bearing Puller Gp | 1 |
Start By:
- Remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) that fasten plate (3) to adapter (2). Remove O-ring seal (4) from adapter (2). Remove the gear from the adapter (2).
Show/hide table
Illustration 2 g00620611 - Remove retaining ring (5) with Tooling (A). Remove bearing (6) with Tooling (B) and a press.
Show/hide table
Illustration 3 g00620731 - Rotate the gear and remove bearing (7) with Tooling (B) and a press. Remove plate (3).
Show/hide table
Illustration 1 | g00620408 |
Caterpillar Information System:
3406E Marine Engine Engine Oil Pressure
Electronic Modular Control Panel II (EMCP II) For MUI Engines Erratic GSC Operation - Troubleshoot
C-15, C-16 and C-18 Truck Engines Accessory Drive - Install
3512B Marine Auxiliary Engine Engine Sensor Open/Short Test
3406E Marine Engine Cylinder Block
3512B Marine Auxiliary Engine Engine Control Switch (ECS)
3512B Marine Auxiliary Engine Starting Motor System
3512B Marine Auxiliary Engine Emergency Stop Switch
3406E On-Highway Engine Crankshaft Position Sensor - Remove and Install
3406E On-Highway Engine Camshaft Position Sensor - Remove and Install
On-Highway Engines Electronic PTO Installation and Application Guide PTO Configurations - Test
3406E On-Highway Engine Front Cover - Install
3512B Marine Auxiliary Engine Engine Speed/Timing Sensor
3512B Marine Auxiliary Engine Air Starting Motor
3054B Industrial Engine Safety Signs and Labels
3512B Marine Auxiliary Engine Diesel Running Indicator
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Install
26SI Series Alternator Alternator
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Install
3512B Marine Auxiliary Engine Permanent Timing Calibration Sensor
26SI Series Alternator General Information
C-15, C-16 and C-18 Truck Engines Accessory Drive - Assemble