Track Roller (Single Flange)
Show/hide table
Illustration 1 | g00518591 |
(1) Add 0.17 L (.04 US gal) of SAE 30CD oil before installing the plug.
(2) At assembly, O-rings of floating seal and all surfaces in contact with the O-rings must be clean and dry. Apply a thin coat of oil on the contacting surfaces of the metal seals before installation.
(3) End Play:
- Minimum ... 0.25 mm (.010 inch)
- Maximum ... 1.25 mm (.050 inch)
(4) Apply a thin coat of oil on the seal.
Caterpillar Information System:
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
3500B and 3500B High Displacement Generator Set Engines Oil Contains Coolant
3524B Engines for Off-Highway Trucks Fuel in Cooling System
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Industrial Engines Engine Oil Pressure Sensor - Remove and Install
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
302.5 Mini Hydraulic Excavator Window (Front) - Early Type (If Equipped)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
302.5 Mini Hydraulic Excavator Storage and Literature Compartment
302.5 Mini Hydraulic Excavator Mirror - If Equipped
302.5 Mini Hydraulic Excavator Lifting Capacities - The Boom Swung 90 Degrees
302.5 Mini Hydraulic Excavator Stopping the Machine
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Charging System - Test
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
320B Excavator Machine System Specifications Swing Gear and Bearing
M312 and M315 Excavators Tool Box
3500B and 3500B High Displacement Generator Set Engines Exhaust Temperature Is Too High
M318 and M320 Excavators Transmission Oil - Change
M312 and M315 Excavators Low Idle Control
325B Excavator Machine Systems Swing Drive - Assemble
Conversion Of Front Shovel To Mass Excavator In The Field{6537} Conversion Of Front Shovel To Mass Excavator In The Field{6537}
320B Excavator Machine System Specifications Swing Gear and Bearing
CR3 Crusher and S3 Shear Hydraulic Cylinder
S3 Shear and CR3 Crusher Relief Valve