Engine Oil Filter Base - Install
Installation Procedure
All Engines
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install a new O-ring seal and put engine oil manifold (7) in position on the engine.
Show/hide table
Illustration 1 | g00584907 |
- Install nut (6) and tighten the nut to a torque of 80 N·m (59 lb ft).
- Remove the caps or the plugs from the openings and connect hose (3) and hose (4) to the original location on engine oil manifold (7) .
- Put engine oil filter base (2) in position on the engine and install bolts (1) .
Show/hide table
Illustration 2 | g00584891 |
Remote mounted engine oil filter base |
- Remove the caps or the plugs from the openings and connect hose (3) and hose (4) to the original location on engine oil filter base (2) .
- Install engine oil filter (5) onto engine oil filter base (2) .
For engines that are equipped with a turbocharger, refer to "Turbocharged Engines" for more information.
Turbocharged Engines
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put the gasket and engine oil filter base in position on the engine and install bolt (1) .
Show/hide table
Illustration 3 | g00611406 |
Show/hide table
Illustration 4 | g00611233 |
- Put engine oil cooler (2) in position on the engine oil filter base. Install stud (5) that fastens engine oil cooler (2) to the engine oil filter base.
- Remove the caps or the plugs from the openings and install the hoses and two hose clamps (4). Fill the cooling system to the correct level with coolant.
- Install engine oil filter (3) onto engine oil cooler (2) .
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
G3508, G3512 and G3516 Engines Cylinder Head - Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Travel Motor
G3500 Engines Cylinder Head - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine - Clean
3500B Engines Accessory Drive (Upper Right Hand)
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors Component - Test
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft - Remove
3034 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove
3406E Generator Set Engines Cold Weather Starting
3406E Generator Set Engines Starting the Engine
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft - Install
3176B Industrial Engine Maintenance Interval Schedule
3054 and 3056 Industrial and Generator Set Engines Water Temperature Regulator Housing
3408E and 3412E Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
G3500 Engines Exhaust Manifold - Remove - Dry
3406E Generator Set Engines Engine Speed Governing
3034 Engine for Caterpillar Built Machines Water Pump - Remove
3034 Engine for Caterpillar Built Machines Water Pump - Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Travel Counterbalance Valve
3176C Engine Air Starting - If Equipped
120H and 135H Motor Graders Hydraulic and Steering System Accumulator (Steering)
3034 Engine for Caterpillar Built Machines Cylinder Head - Remove