Engine Oil Bypass Valve
Show/hide table
 | |
| Illustration 1 | g00527196 |
The engine oil bypass valve has the following pressure setting. ... 415 to 470 kPa (60 to 68 psi)
(1) Housing
- Bore diameter ... 18.24 to 18.27 mm (.718 to .719 inch)
(2) Plunger
- Diameter ... 18.16 to 18.18 mm (.715 to .716 inch)
- Clearance of plunger in bore of engine oil bypass valve ... 0.06 to 0.11 mm (.002 to .004 inch)
(3) Spring
- Length under test force ... 59.8 mm (2.35 inch)
- Test force ... 15.9 to 23.1 N (3.57 to 5.19 lb)
(4) Bolt
- Tighten the bolt to the following torque. ... 44 ± 5 N·m (33 ± 4 lb ft)
Caterpillar Information System:
3054 Truck Engine Turbocharger
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Instrument Modules for Marine Applications
3054 Truck Engine Piston and Rings
3412E, C30 and C32 Marine Engines Aftercooler - Remove
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Instrument Modules for Generator Set Applications
3606 and 3608 Engines Camshaft - Earlier
G3500B Engines Jacket Water Inlet Pressure Switch
3054 Truck Engine Fuel Injection Nozzles
3412E and C30 Marine Engines General Information
3176C and 3196 Engines For Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Glossary of Electrical Terms
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B and 3516C Engines Caterpillar Monitoring System Internal Panel Components
Installation Of The Hydraulic Actuator System (Hydrax System) on G3612 and G3616 Engines{1050, 1250, 1908, 1915} Installation Of The Hydraulic Actuator System (Hydrax System) on G3612 and G3616 Engines{1050, 1250, 1908, 1915}
3408E and 3412E Engines for Caterpillar Built Machines Fuel System
Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters for G3600, 3600, and C280 Engines Introduction
Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters for G3600, 3600, and C280 Engines Installation and System Start-Up
3126E and 3126B Commercial and Truck Engines Additional Reference Material
3054 Truck Engine Crankshaft
3406C (PEEC III) Truck Engines Electronic Control System Components
3176C and 3196 Industrial Engines Engine Oil Filter Base - <B>122-0725</B> Oil Filter Base
3606 and 3608 Engines Flexible Coupling
3054 Truck Engine Air Inlet Heater
3054 Truck Engine Water Temperature Regulator
3054 Truck Engine Water Pump