3600 Heavy Fuel Engines Caterpillar


Fuel System Fuel Injector - Clean/Inspect

Usage:

3616 1PD
对有关以下主题的说明,参阅维修手册, "拆解与组装"单元:

  • 喷油器的拆卸与安装

  • 清洁喷油器的孔

  1. 从缸盖上卸下喷油器。

  1. 根据专门说明书, SEHS9741, "清洁 3600 单体喷油器":

    • 清洁

    • 拆解

    • 检查

    • 组装

    如有必要,更换新的喷油器。

  1. 清洁喷油器的孔。

  1. 安装喷油器。

Caterpillar Information System:

3306C Truck Engine Camshaft Bearings - Remove and Install
3600 Heavy Fuel Engines Fuel Oil Separator - Check
Electronic Modular Control Panel II (EMCP II) for EUI Engines SP Fault Code - Troubleshoot
3306C Truck Engine Cylinder Liner - Install
3600 Heavy Fuel Engines Fuel Oil Conditioning Module - Check
Flushing And Pickling Process Of Engine Piping{1071} Flushing And Pickling Process Of Engine Piping{1071}
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 100 FMI 2 Pressure Sensor (Engine Oil) Incorrect Signal - Test
3612 and 3616 Fast Vessel Engines Fuel System Primary Filter (Water Separator) Element - Replace
Electronic Modular Control Panel II (EMCP II) for EUI Engines Troubleshooting Diagnostic Codes
3406E, C-10, C-12, C-15, C-16 Truck Engines Fuel System Secondary Filter - Replace
3306C Truck Engine Flywheel Housing - Remove and Install
3612 and 3616 Fast Vessel Engines Fuel System Primary Filter/Water Separator - Drain
Electronic Modular Control Panel II (EMCP II) for EUI Engines AL Fault Code - Troubleshoot
3600 Heavy Fuel Engines Fuel System Fuel Injector Tip Cooling Module - Check
3600 Distillate Fuel Engines Fuel Tank Water and Sediment - Drain
3612 and 3616 Fast Vessel Engines Prelube Pump - Lubricate
3600 Heavy Fuel Engines Turbocharger - Water Wash
3306C Truck Engine Crankshaft Main Bearings - Remove
Electronic Modular Control Panel II (EMCP II) for EUI Engines Troubleshooting Dedicated Shutdown Indicators
3306C Truck Engine Crankshaft Main Bearings - Install
P16, P20, P25, P28, P40 and P60 Pulverizers Machine Preparation for Troubleshooting
Electronic Modular Control Panel II (EMCP II) for EUI Engines Indicator for Low Oil Pressure - Troubleshoot
3600 Heavy Fuel Engines Turbocharger Nozzle - Clean
P16, P20, P25, P28, P40 and P60 Pulverizers Visual Inspection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.