Improvements Have Been Made to Simplify Brake Hose Routing on Certain 700 C-Series Articulated Trucks {4257, 4258, 4263, 4291, 429B}
- Articulated Truck
- 735C (S/N: LFJ255-UP; TFJ305-UP)
- 740C EJECTOR (S/N: LFN279-UP; TFN199-UP)
- 745C (S/N: JE890120-UP; LFK1086-UP; TFK1650-UP)
- 740C EJECTOR (S/N: LFN279-UP; TFN199-UP)
Improvements have been made to simplify brake hose routing on certain 700 C-Series Articulated Trucks. Different fittings will be used at the brake control valve for the front and rear brakes. "P1" will be a #6 port and "P2" changed to a #8 port. This is applied to hose end fittings through to the accumulator so the two lines cannot be crossed.
The improved hose routing is effective with all products after the listed serial numbers.
Caterpillar Information System:
735C and 745C Articulated Trucks Machine Systems General Information (HVAC System)
New Engine Software Is Now Used on Certain Material Handlers and Wheeled Excavators {7610, 7620} New Engine Software Is Now Used on Certain Material Handlers and Wheeled Excavators {7610, 7620}
994K Large Wheel Loader Field Assembly Manual Battery and Wiring - Install - Located Behind the Radiator
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
740 GC, 740 Ejector, 745 Articulated Truck Machine System Seat Suspension - Remove and Install
990K Wheel Loader Systems Air Conditioner
740 GC, 740 Ejector, 745 Articulated Truck Machine System Steering Column - Assemble
740 GC, 740 Ejector, 745 Articulated Truck Machine System Steering Column - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Machine System Steering Column - Remove and Install
® Onboard 5.3 Configuration Guide MineStar Message Queue Retry
A Common Boom Cylinder and Bucket Cylinder is Now Used on Certain Backhoe Loaders {5456, 5457, 5498} A Common Boom Cylinder and Bucket Cylinder is Now Used on Certain Backhoe Loaders {5456, 5457, 5498}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Centrifugal Oil Filter (Seals) - Replace - If Equipped with COF
MD6310 Rotary Drill Monitoring System
Process for Optimizing or Extending Oil Drain Intervals on Off Highway Trucks Equipped with a Centrifugal Oil Filter {1000, 1328, 1348} Process for Optimizing or Extending Oil Drain Intervals on Off Highway Trucks Equipped with a Centrifugal Oil Filter {1000, 1328, 1348}
Procedure to Install New Alternator Group and Support Bracket on Certain 770G and 772G Off-Highway Trucks {1405, 1802, 5917} Procedure to Install New Alternator Group and Support Bracket on Certain 770G and 772G Off-Highway Trucks {1405, 1802, 5917}
Injection Timing Correction Procedure on Certain C3.8 Engines {0781, 0782, 1000, 1920} Injection Timing Correction Procedure on Certain C3.8 Engines {0781, 0782, 1000, 1920}
Injection Timing Correction Procedure on Certain C3.3B Engines {0781, 0782, 1000, 1920} Injection Timing Correction Procedure on Certain C3.3B Engines {0781, 0782, 1000, 1920}
Procedure to Improve the Steering Oil Lines Group on Certain 777G Off-Highway Trucks {4304, 5057} Procedure to Improve the Steering Oil Lines Group on Certain 777G Off-Highway Trucks {4304, 5057}
777D and 777E Off-Highway Truck Steering System Piston Pump (Steering)
Release Notes for Cat® Product Link Back-Office 2017A.2 {7490, 7606, 7610, 7620} Release Notes for Cat® Product Link Back-Office 2017A.2 {7490, 7606, 7610, 7620}
548 Forest Machine Machine System Upper Frame
777D and 777E Off-Highway Truck Steering System Steering Gear
548 Forest Machine Machine System Travel Motor Lines
992K Wheel Loader Systems Pressure Switch (Air Conditioner) - Compressor Clutch Refrigerant