Fuel Lines
Show/hide table
 | |
| Illustration 1 | g00281513 |
Typical example | |
(1) Plug
(2) Fuel manifold
(3) Supply hose assembly from the electronic control module (ECM)
(4) 104-1729 Spring
- Assembled length ... 18.4 mm (.72 inch)
- Operating length (minimum) ... 15.4 mm (.61 inch)
- Free length after test ... 30.2 ± 0.7 mm (1.19 ± .03 inch)
- Outside diameter ... 11.3 mm (.44 inch)
- Operating length (minimum) ... 15.4 mm (.61 inch)
(5) Stud
- Apply 9S-3263 Thread Lock Compound on the taperlock end of the stud to the following length. ... 7.6 mm (.30 inch)
- Tighten the stud to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
C-10 and C-12 Truck Engines Engine Design
3412 Generator Set Engines Fuel System
C-10 and C-12 Truck Engines Engine Design
3512B and 3516B High Displacement Locomotive Engines Safety Messages
3412 Generator Set Engines Electrical System
P16, P20, P25, P28, P40 and P60 Pulverizer Crushing Prevention and Cutting Prevention
3406E, C-10, C-12, C-15, C-16 Truck Engines Monitoring System
3412 Generator Set Engines Fuel System
3500B Locomotive Engines Gauges and Indicators
3408E and 3412E Industrial Engines Reference Material
3034 Engine for Caterpillar Built Machines General Information
3034 Engine for Caterpillar Built Machines Engine Design
Cat Commercial Diesel Engine Fluids Recommendations General Fuel Information
C-10 and C-12 Truck Engines Fuel Filter and Water Separator
Cat Commercial Diesel Engine Fluids Recommendations Fuel Information for Diesel Engines
D6M Track-Type Tractor Characteristics of Diesel Fuel
3176C and 3196 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant System - Evacuate
3176C and 3196 Industrial Engines Cylinder Head Valves
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head
Assembly and Installation of Inverted Duo-Cone Seals{7561} Assembly and Installation of Inverted Duo-Cone Seals{7561}