Engine Oil Pump
Show/hide table
Illustration 1 | g06153998 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand to ensure that the pump rotates freely. | |||
B | 1 | 417-7838 Oil Pump Gear | Length of the new gear is Depth of the bore in the oil pump body for new gear is |
C | 1 | 416-9861 Oil Pump Shaft Assembly | Diameter is Distance (A) from the end of the shaft to the gear face is |
D | 1 | 416-9860 Oil Pump Shaft Assembly | Diameter is Distance (F) from the end of the shaft to the gear face is |
E | 1 | 416-9862 Oil Pump Gear | Length of the new gear is Depth of the bore in the oil pump body for new gear is |
Show/hide table
Illustration 2 | g06154000 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
G | - | - | Position for the bushing joints from the centerline through the bushing bores of the 508-3311 Pump Cover is 30±15 degrees. |
1 | 1 | 507-1694 Sleeve Bearing | After installation, bore diameter is Installation depth is |
2 | 1 | 507-1691 Sleeve Bearing | After installation, bore diameter is Installation depth is |
H | 2 | 7N-5683 Dowel | Extension of dowels from the oil pump cover is |
Show/hide table
Illustration 3 | g06154003 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
J | - | - | Position for the bushing joints from the centerline through the bushing bores of the 416-9859 Pump Body is 30 ± 15 degrees. |
3 | 1 | 507-1691 Sleeve Bearing | After installation, bore diameter is Installation depth is |
4 | 1 | 507-1694 Sleeve Bearing | After installation, bore diameter is Installation depth is |
Caterpillar Information System:
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Dosing Control System Operation
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Air Inlet and Exhaust System Operation - Aftertreatment
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Split Drum
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347} Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054} Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054}
High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551} High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551}
2570D and 2670D Wheel Feller Buncher Power Train Piston Pump (Propel) - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral (Mechanical) - Test and Adjust - Solid Drum
Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173} Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173}
A New Steering Column Is Now Used On Certain Asphalt Pavers {4300, 4304, 4309, 4310, 4338, 4343} A New Steering Column Is Now Used On Certain Asphalt Pavers {4300, 4304, 4309, 4310, 4338, 4343}
745 Articulated Truck Retarder Control
An Updated Support Assembly is Now Available on Certain R1300G Load Haul Dump Engines {1152, 1153, 1154} An Updated Support Assembly is Now Available on Certain R1300G Load Haul Dump Engines {1152, 1153, 1154}
785G Off-Highway Truck Machines Systems Window Wiper Motor - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Solid Drum
AP355F Asphalt Paver Machine Systems Generator - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Split Drum
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
785G Off-Highway Truck DEF Manifold Filters - Replace
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920} New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920}
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Travel Speed - Check