Fuel Pressure Control Valve
Show/hide table
Illustration 1 | g00287263 |
(1) 5T-2760 Spring
- Length under test force ... 56.0 mm (2.20 inch)
- Test force ... 159 N (35 lb)
- Free length after test ... 77.0 mm (3.03 inch)
- Outside diameter ... 24.0 mm (0.95 inch)
- Test force ... 159 N (35 lb)
(2) Set the adjusting bolt in order to provide the following fuel pressure. ... 550 ± 120 kPa (80 ± 17 psi)
(3) Lubricate the threads of adjusting bolt (2) and the bore of the valve body after installing the retainer and the seal.
Caterpillar Information System:
3618 Engine Fuel Injector Mechanism
3612 and 3616 Engines Water Pump
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Refill Capacities
G3612 and G3616 Engines Flywheel
G3300 Engines Engine Air Precleaner - Clean
3612 and 3616 Engines Water Temperature Regulator
3612 and 3616 Engines Water Temperature Regulator
3500B Engines for Caterpillar Built Power Modules Water Temperature Regulator
3612 and 3616 Engines Fuel Filter Housing
3512 and 3516 EUI Engines for Caterpillar Built Machines Air Starting System
3618 Engine Fuel Transfer Pump
3406E Truck Engine Electric Starting Motor
3618 Engine Fuel Injection Control Linkage
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cooling System Coolant (DEAC) - Change
G3606 and G3608 Engines Camshaft Bearing Position
G3606 and G3608 Engines Camshaft Bearings
G3606 and G3608 Engines Cylinder Block
3618 Engine Compression Release Valve
3618 Engine Fuel Injection Lines
3612 and 3616 Engines Priority Valve
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
3406E and 3456 Industrial Engines Rocker Shaft
3406E Truck Engine Engine Oil Filler
Torque Specifications Straight Thread O-Ring Fittings