3176C and 3196 Marine Engines Caterpillar


Water Temperature Regulator

Usage:

3196 2XR


Illustration 1g01431197

(1) Install the lip type seal into the water temperature regulator housing. Lubricate the sealing lip on the lip type seal with a small amount of antifreeze.

(A) Minimum stroke of the water temperature regulator at fully open temperature ... 10.4 mm (0.41 inch)

(2) Fully open temperature of the water temperature regulator ... 98 °C (208 °F)

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.