Cylinder Head Grounding Stud - Inspect/Clean/Tighten
Show/hide table
图 1 | g00738038 |
(1) 缸盖接地螺柱 |
检查原始设备制造商(OEM)线束连接是否良好。
气缸盖接地螺栓必须具备连接到蓄电池的接地线。 每一次换机油时要拧紧气缸盖接地螺栓。 接地线和接地带应共同连接到发动机接地点。 所有接地点必须牢固且无腐蚀现象。
- 使用干净的布来清洁缸盖接地螺柱和接线柱。
- 如果连接处被腐蚀,使用烘焙苏打和水的溶液清洁连接处。
- 保持气缸盖接地螺栓和接地带清洁,并用多用途含钼锂基润滑脂(MPGM)或石油冻涂覆。
Caterpillar Information System:
3176C and 3196 Industrial Engines Cooling System Coolant (ELC) - Change
3612 and 3616 Fast Vessel Engines Safety Messages
3500B Engines for Caterpillar Built Power Modules Engine Speed Sensor
3176C and 3196 Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
3500C Marine Engines Turbocharger Exhaust Temperature Sensor
3176C and 3196 Industrial Engines Fuel System Secondary Filter - Replace
3500 Generator Set Engines Cylinder Block
3176C and 3196 Industrial Engines Fuel System - Prime
3176C and 3196 Industrial Engines Engine Oil Level - Check
3500B Engines for Caterpillar Built Power Modules Alternator Mounting
3500 Generator Set Engines Vibration Damper
3508B Engine for Caterpillar Built Machines Accessory Drive
3306B Industrial Engine Driven Equipment - Check
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Accessory Drive (Upper Right Hand)
3176C and 3196 Industrial Engines Engine Air Cleaner Element (Dual Element) - Clean/Replace
3176C and 3196 Industrial Engines Engine Air Cleaner Service Indicator - Inspect
3176C and 3196 Industrial Engines Engine Crankcase Breather - Clean
3176C and 3196 Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3612 and 3616 Fast Vessel Engines Reference Information
3306B Industrial Engine Fan Drive Bearing - Lubricate
3500B Engines for Caterpillar Built Power Modules Accessory Drive (Upper Right Hand)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Level Switch
120H and 135H Motor Graders Shipping the Machine
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Auxiliary Water Pump