CCS7 Combination Vibratory Compactors Machine Systems Caterpillar


Articulating and Oscillating Hitch - Install

Usage:

CCS7 4B2

安装步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
422-8733  台架 
439-3939  连杆支架组件 


    图 1g03860791


    图 2g00833837


    图 3g00833839

  1. 将适当的起吊设备和工具 (B) 连接到轭 (8) 上。 将轭 (8) 和摆动式铰接件 (7) 作为一个整体安装,然后安装盖和螺栓 (9)。 轭 (8) 和摆动式铰接件 (7) 的重量约为 825 kg (1820 lb)

  2. 提升机器并将工具 (A) 从机架上拆下。 将工具 (A) 安装到轭 (8) 下方,如图所示。 降下轭 (8)。 将起吊设备和工具 (B) 从轭 (8) 上拆下。


    图 4g03860639

  3. 将转向油缸 (6)、销组件 (5) 和螺栓 (4) 安装到摆动式铰接件 (7) 上。


    图 5g00833835

  4. 连接软管组件 (3)、软管护罩 (1) 和螺栓 (2)。

结束:

  1. 安装钢轮。

Caterpillar Information System:

CCS7 Combination Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Assemble
CCS7 Combination Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Disassemble
A new Plus+1 Service Tool for Caterpillar (P1STC) version 160726 with Plus+1 Guide Service Tool version 7.1.10. Is Now Available {0785} A new Plus+1 Service Tool for Caterpillar (P1STC) version 160726 with Plus+1 Guide Service Tool version 7.1.10. Is Now Available {0785}
CCS7 Combination Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Remove
994K Wheel Loader Machine Systems General Information (Steering System)
2015/07/08 New Implement Software Is Available for AP600D and AP655D Asphalt Pavers with AS4251C Asphalt Screeds that are Equipped with the LPG Heating System {7620}
MH3295 Material Handler Solenoid Valve - Test
16M Series 3 and 18M Series 3 Motor Grader Oil Cooler (Steering)
C11 and C13 Engines Atmospheric Pressure Sensor
MH3295 Material Handler Solenoid Return - Test
CW34 Pneumatic Compactor Machine Electronic Control System Service Tools
CW34 Pneumatic Compactor Machine Electronic Control System General Information
2015/07/08 Cat® Reman Announces Additional Engine Options for Certain Cat Machine Applications {1000}
994K Wheel Loader Machine Systems Location of Components (Steering System)
994K Wheel Loader Machine Systems Electronic Control (Steering System)
Installation Procedure for the Product Link™ PL131, PL141, and PL161 Systems {7606, 7610, 7620} Installation Procedure for the Product Link™ PL131, PL141, and PL161 Systems {7606, 7610, 7620}
R2900G Load Haul Dump Model Views and Specifications
R2900G Load Haul Dump Bucket Rated Load
2015/07/07 Improved Universal Joints Now Used on Certain Load Haul Dump Machines {3251, 3253}
2015/07/07 New Collet Grease Retaining Plug Now Used on R3000H Load Haul Dump Machines {5102, 5104, 6107}
2015/07/08 An Improved Lever Assembly for the Hydraulic Hand Control Group Is Now Used on Certain 424B Backhoe Loaders {5063}
C3.4B Engines Desulfation Is Frequent
MSS3s Machine Security System General Information
MSS3s Machine Security System System Overview
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.