Caterpillar products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Product Identification Number (PIN) and CE Plate
| |
| Illustration 1 | g00675011 |
The PIN plate is positioned on the front of the machine, close to the operator compartment.
| |
| Illustration 2 | g02436556 |
Model number (A)____________________
Machine PIN (B)____________________
Service Information Plate (C)____________________
Year of Manufacture (If Required) (D)____________________
CE Plate (If Required) (E)
Country of Origin Info Plate (If Required) (F)
Local regulation may require documentation of the Year of Manufacture in the OMM. Comply with these regulations.
Note: The CE plate is on machines that are going into the European Union.
Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.
If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.
| |
| Illustration 3 | g01883459 |
For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.
- Primary Engine Power (kW)____________________
- Additional Engine Power (kW)____________________
- Typical Machine Weight (kg)____________________
- Year of Construction____________________
- Machine Type____________________
For the name, the address and the country of origin for the manufacturer, see the PIN plate.
Note: This label is on machines that are going into Canada.
| |
| Illustration 4 | g06063443 |
If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.
This label is located on the engine.
Engine Serial Number ____________________
If equipped, this label is located on the cab door.
| |
| Illustration 5 | g02793636 |
If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".