C2.2 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Lines

Usage:

239D BL9

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g03788573
Typical example

(1) ( 3) Torque for the nuts on the high-pressure fuel lines ... 22.5 N·m (16.6 lb ft)

(2) Torque for the bolts ... 13 N·m (115 lb in)

Caterpillar Information System:

C2.2 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C2.2 Engines for Caterpillar Built Machines Exhaust Cooler (NRS)
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application System Schematic
AP655F and AP655F L Asphalt Paver Additional Messages
AP600F Asphalt Paver Machine Systems Conveyor Chain (Drag) - Check and Adjust
AP655F Asphalt Paver Additional Messages
MH3037 Material Handler Machine Systems Piston Pump (Main Hydraulic) - Remove and Install
AP655F and AP655F L Asphalt Paver Safety Messages
558 Forest Machine Stopping the Engine
AP600F Asphalt Paver Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
Crankshaft Seal Installation Procedure Using the 484-7863 Tool As On Certain 3500 and G3500 Engines{0701, 1160, 1161} Crankshaft Seal Installation Procedure Using the 484-7863 Tool As On Certain 3500 and G3500 Engines{0701, 1160, 1161}
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Ride Control System
C2.2 Engines for Caterpillar Built Machines Fuel Manifold (Rail)
C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
C7.1 Engines Glow Plug Starting Aid - Test
2015/02/25 New WebGPI Software Application File Is Now Available on Certain AP255E and AP300D Asphalt Pavers {7620}
C2.2 Engines for Caterpillar Built Machines Crankcase Breather
C7.1 Engines Idle Validation - Test
AP600F Asphalt Paver Machine Systems Conveyor Speed (Drag) - Check
AP655F Asphalt Paver Fire Extinguisher Location
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission - Remove and Install
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Control Valve (Stick Lowering)
AP655F and AP655F L Asphalt Paver Sound Information and Vibration Information
AP655F Asphalt Paver Sound Information and Vibration Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.