Window Wiper and Wiper Motor
Show/hide table
 | |
| 图 1 | g03785206 |
左视图 | |
Show/hide table
| 398-3577 车窗雨刮器和冲洗器 的技术规格 | |||
|---|---|---|---|
| 项目 | 数量 | 零件 | 技术规格说明 |
| C | - | - | 停止位置为 125.0 ± 3.0 mm (4.92 ± 0.12 in)。 |
| 1 | 22 | 1S-9593 电缆扎带 | 根据需要使用。 电缆扎带不宜约束软管。 |
| 2 | - | - | 拧紧至扭矩为 13 ± 2 N·m (115 ± 18 lb in)。 |
| 3 | - | - | 按照以下说明安装雨刮器臂： 1. 等待最少 0.5 小时，最多 4 小时，拧紧至扭矩为 24 ± 1 N·m (212 ± 9 lb in)。 2. 再次拧紧至扭矩为 24 ± 1 N·m (212 ± 9 lb in)。 |
| 4 | 4 | 5C-9553 螺栓 | 拧紧至扭矩为 9 ± 1 N·m (80 ± 9 lb in)。 |
| 5 | - | - | 拧紧至扭矩为 2.5 ± 0.5 N·m (22.1 ± 4.4 lb in)。 |
Show/hide table
 | |
| 图 2 | g03785207 |
后视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
|---|---|---|---|
| 6 | 3 | 8T-5400 接头组件 | 拧紧至扭矩为 0.35 ± 0.05 N·m (3.10 ± 0.44 lb in)。 |
| D | - | - | 停止位置为 43.0 ± 3.0 mm (1.69 ± 0.12 in)。 |
Show/hide table
 | |
| 图 3 | g03785208 |
前视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
|---|---|---|---|
| 7 | 4 | 8T-4908 螺栓 | 拧紧至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。 |
| 8 | 2 | 7Y-3474 单向阀组件 | 单向阀阀体大致为箭头形状。 从泵向喷嘴组装箭头。 |
Show/hide table
 | |
| 图 4 | g03785209 |
车窗雨刮器马达总成 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
|---|---|---|---|
| 9 | 3 | 5C-9553 螺栓 | 拧紧至扭矩为 8.5 ± 0.5 N·m (75.2 ± 4.4 lb in)。 |
| 10 | 1 | 344-5674 螺母 | 拧紧至扭矩为 20 ± 2 N·m (177 ± 18 lb in)。 |
| 11 | - | - | 将螺母拧紧至扭矩为 13 ± 2 N·m (115 ± 18 lb in)。 |
| 12 | - | - | 拧紧至扭矩为 9 ± 1 N·m (80 ± 9 lb in)。 |
| E | - | - | 刮扫角度为 110 ± 2 度。 |
Caterpillar Information System:
735C, 745C and 740C EJECTOR Articulated Truck Systems Rollover Protective Structure (ROPS) Mounting
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Service Brake
2015/01/19 Improved Chrome Coverage on Multi Purpose Bucket Cylinder Rods on F-series Backhoe Loaders. {5457}
C4.4 and C6.6 Engines Cooling Fan Speed - Test
C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
730,735 and 730 EJECTOR Articulated Truck Systems Solenoid Valve (Hydraulic Fan Speed Control)
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Air Cleaner
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Gear Pump (Brake/Axle Oil Cooler)
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Hoist Control Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Differential
C7.1 Engines Cooling Fan Reversing - Test - Hydraulic Driven Fan
2015/02/05 New Adapters for the Moldboard are Now Available on Certain Motor Graders {6174, 6801, 6804}
C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
C2.2 Engines for Caterpillar Built Machines Engine Oil Filter
C7.1 Engines Data Link - Test
735C, 745C and 740C EJECTOR Articulated Truck Systems Battery and Wiring Group
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Turbocharger - Remove and Install
SE50 V and SE50VT Asphalt Screeds Safety Messages
730,735 and 730 EJECTOR Articulated Truck Systems Gear Motor (Hydraulic Fan)
735C, 745C and 740C EJECTOR Articulated Truck Systems Radiator
Instructions for Installing Hydraulic Fluid Monitoring on Certain 24M Motor Graders{0113, 1439, 5095} Instructions for Installing Hydraulic Fluid Monitoring on Certain 24M Motor Graders{0113, 1439, 5095}
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Radiator - Shroud
735C, 745C and 740C EJECTOR Articulated Truck Systems Battery and Wiring Group