AP655F and AP655F L Asphalt Paver Machine Systems Caterpillar


Power Crown Group

Usage:

AP655F 452


Illustration 1g03692643

Table 1
Item  Qty  Part  Specification Description 
8T-4195 Bolt  Torque to 5 ± 1 N·m (44 ± 9 lb in)


Illustration 2g03692649
View of area A

Table 2
Item  Qty  Part  Specification Description 
8T-4910 Bolt  Torque to 7.0 ± 2.5 N·m (62.0 ± 22.1 lb in)
8T-5065 Locknut  There should not be axial movement and drive shaft group should be rotated by hand.
Torque to 120 ± 12 N·m (89 ± 9 lb ft)
As required, use the following shims: 
6 450-5711 Shim  Thickness is 0.8 mm (0.03 inch)
364-7062 Pin  Diameter is 25.00 ± 0.10 mm (0.984 ± 0.004 inch)

Caterpillar Information System:

Rework Procedure to Update AP1000B and AP1055B Asphalt Pavers with 25KW Generator Group {5639} Rework Procedure to Update AP1000B and AP1055B Asphalt Pavers with 25KW Generator Group {5639}
794 AC Off-Highway Truck Machine Systems Pump Drive
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Main) - Test and Adjust
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Signal Limiter) - Test and Adjust
2014/08/01 New VIMSTM Software is Now Available On Certain Off-Highway Truck/Tractors {7601, 7620}
PM-200 Cold Planer Maintenance Interval Schedule
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump (Maximum Displacement) - Test and Adjust - Test without Flow Meter
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Final Drive Spindle and Service Brake - Disassemble
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Tap Locations
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Fan Speed - Test and Adjust
The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
AP1000F Asphalt Paver Propel System Bogie
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor
C3.4B Industrial Engine Welding on Engines with Electronic Controls
C3.4B Industrial Engine Coolant (DEAC) - Change
AP1000F Asphalt Paver Machine Systems Canopy
C3.4B Industrial Engine Coolant (ELC) - Change
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Sensor
C3.4B Industrial Engine Diesel Exhaust Fluid Filter - Clean/Replace
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Pressure Sensor - Remove and Install
AP1000F Asphalt Paver Machine Systems Roading Lighting
AP1000F Asphalt Paver Machine Systems Steering Column
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Pressure Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.