Cab Air Filter - Clean/Replace
Show/hide table
Illustration 1 | g03674587 |
Location of the filter element for the cab (1) Cover (2) Screw (3) Cab filter element (4) Fresh air filter |
The fresh air filter and cab filter element for the cab is located inside the operator compartment.
- Loosen retaining screw (2). Remove cover (1) and the filter (3) and (4).
- Wash the filter in a nonsudsing detergent.
- Rinse the filter in clean water. Allow the filter element to air dry.
- Install the clean filter and cover (1). Tighten retaining screw (2).
Note: When rips or tears are noticed in the filter element, install a new filter element. When a reduction of air circulation is noticed in the cab after cleaning the filter element, install a new filter element.
Caterpillar Information System:
2014/05/12 Procedure to Rework the Air Conditioner on Certain Load Haul Dump Machines {1808, 7320}
785G Off-Highway Truck Windows - Clean
785G Off-Highway Truck Window Wiper - Inspect/Replace
2014/05/12 New Software Patch Is Now Available for Cat® MineStar Fleet Office v4.0.4 {7605}
2014/05/21 New Software Patch Is Now Available For MineStar Health Office v4.0.4 -2 {7605, 7620}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake System Pressure - Test
2014/05/23 Troubleshooting SIM Cards On Product Links 522 and 523 For All Generator Sets {7606}
794 AC Off-Highway Truck Systems Control Manifold (Steering)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Tap Locations
SE50 V and SE50VT Asphalt Screeds Monitoring System
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake Wear Indicator - Check
AP1000F Asphalt Paver Stopping the Engine
785G Off-Highway Truck Breather (Fuel Tank) - Replace
C15 and C18 Engines for Caterpillar Built Machines Cover Group (Front Housing)
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
725C Articulated Truck Venturi Tube - Remove and Install
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Electronic Control Module (ECM) - Configure
420F2 IT, 420F2 ST, 427F2, 428F2, 430F2 IT, 430F2 ST, 432F2, 434F2 and 444F2 Backhoe Loaders Electronic Control Module (ECM) - Flash Program
794 AC Off-Highway Truck Systems Traction Rectifier - Test
994K Wheel Loader Machine Systems Electronic Control Module (ECM) - Replace
785G Off-Highway Truck Safety Messages
Inspection of the Coupling Assembly for 3524 Engines {3279} Inspection of the Coupling Assembly for 3524 Engines {3279}
725C Articulated Truck Pressure Sensor (NRS Absolute) - Remove and Install
794 AC Off-Highway Truck Systems Motor Speed Sensor - Test