Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Caterpillar


Diagnostic Trouble Codes

Usage:

826K 232
Table 1 lists the Communication Gateway #1 (VIMSTM Main) electronic control module (ECM) diagnostic trouble codes (DTCs) and correction procedure references.

Diagnostic Trouble Code (DTC) Information

Table 1
Communication Gateway #1 ECM (VIMSTM Main) ECM
(MID 161) 
DTC(1)  Description  Procedure 
168-0  Electrical System Voltage: Data Valid But Above Normal Operating Range  Electrical Power Supply - Test 
168-1  Electrical System Voltage: Data Valid But Below Normal Operating Range  Electrical Power Supply - Test 
254-14  Electronic Control Module: Special Instruction  Data Link Configuration Status - Test 
296-9  Transmission Control: Abnormal Update Rate  Data Link - Test 
296-14  Transmission Control: Special Instruction  Data Link Configuration Status - Test 
590-9  Engine Control Module: Abnormal Update Rate  Data Link - Test 
590-14  Engine Control Module: Special Instruction  Data Link Configuration Status - Test 
596-9  Implement Control: Abnormal Update Rate  Data Link - Test 
596-14  Implement Control: Special Instruction  Data Link Configuration Status - Test 
800-11  VIMS Main Module: Failure Mode Not Identifiable  Data Link Configuration Status - Test 
823-3  Service Lamp: Voltage Above Normal  Lamp (Service) - Test 
823-5  Service Lamp: Current Below Normal  Lamp (Service) - Test 
823-6  Service Lamp: Current Above Normal  Lamp (Service) - Test 
890-9  Telemetry Data Link: Abnormal Update Rate  Data Link - Test 
1250-9  Remote Communication Module: Abnormal Update Rate  Data Link - Test 
1250-14  Remote Communication Module: Special Instruction  Data Link Configuration Status - Test 
2448-9  Graphical Display Module: Abnormal Update Rate  Data Link - Test 
3766-14  Subscriber Identity Module (SIM) Card: Special Instruction  Subscriber Identity Module (SIM) Card - Test 
(1) Diagnostic Trouble Codes (DTC) are shown as the CID followed by the FMI

Caterpillar Information System:

Cat® Command For Hauling MID 039 - CID 3730 - FMI 06
Cat® Command For Hauling MID 039 - CID 3730 - FMI 05
980L Wheel Loader Ride Control Accumulator - Check
Cat® Command For Hauling MID 039 - CID 3730 - FMI 03
Cat® Command For Hauling MID 039 - CID 3729 - FMI 06
Cat® Command For Hauling MID 039 - CID 3729 - FMI 05
Cat® Command For Hauling MID 039 - CID 3729 - FMI 03
586C LRC Site Prep Tractor Capacities (Refill)
773E Off-Highway Truck Maintenance Interval Schedule
Cat® Command For Hauling MID 039 - CID 3728 - FMI 09
Cat® Command For Hauling MID 039 - CID 3727 - FMI 09
Cat® Command For Hauling MID 039 - CID 3726 - FMI 09
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Event Codes
2014/05/21 New Hydraulic Pressure Relief Valve Is Now Used on Certain Asphalt Pavers {5479, 5640}
2014/05/09 New Display Software with Additional Languages Is Now Used on Certain Vibratory Soil Compactors {7490, 7620}
2014/06/13 New Circuit Breaker Assemblies for Screed Heater Wiring Group Are Now Used On Certain Asphalt Pavers and Asphalt Screeds {1408, 1420}
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Operating Hours Discrepancy
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Electronic Service Tool Does Not Communicate
2014/04/18 A New Check Valve Is Now Used on Certain 793D Off-Highway Trucks {1374, 5057, 5067, 5068}
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Tilt Linkage) - Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems General Information (Brake System)
AP1055F Asphalt Paver Machine Systems Pump Control Valve (Auxiliary) - Test and Adjust
785G Off-Highway Truck/Tractor Electrical and Hydraulic Systems Diagnostic Trouble Codes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.