| |
| Illustration 1 | g03661146 |
| (1) Transmission | |
The transmission is located below and rearward of the cab between the input and output gear housings.
| |
| Illustration 2 | g03661180 |
|
(1) Transmission
(2) Torque converter | |
The torque converter is located in the input gear housing. The torque converter is located between the engine and the transmission.
824K-825K Speed and Direction Valves
| |
| Illustration 3 | g03661194 |
|
824K-825K (3) Modulating valves for speed control (4) Modulating valves for direction control | |
The location for the six modulating valves on the lower left side of the transmission. Four modulating valves (3) are for speed control. Two modulating valves (4) are for direction control.
826K Speed and Direction Valves
| |
| Illustration 4 | g03661195 |
|
826K (3) Modulating valves for speed control (4) Modulating valves for direction control | |
The location for the five modulating valves on the lower left side of the transmission. Three modulating valves (3) are for speed control. Two modulating valves (4) are for direction control.
Note: The 826K machine does not have a third speed gear.
Torque Converter Lock Up Clutch Valve
| |
| Illustration 5 | g03661467 |
| (13) Modulating valve for the lockup clutch | |
The modulating valve for the lockup clutch is located on the right side of the torque converter, below the pump drive housing.
| |
| Illustration 6 | g03661224 |
| (5) Oil pump (transmission) | |
The oil pump for the transmission is attached to the end of the steering pump.
| |
| Illustration 7 | g03661240 |
| (6) Screen (suction) | |
The screen for the transmission oil is located on the lower right side of the transmission.
| |
| Illustration 8 | g03661248 |
| (7) Power Train Oil Filter | |
The power train oil filter is located on the left side of the machine below the platform in the hydraulic service center.
Transmission Input Gear Transfer Case
| |
| Illustration 9 | g03661254 |
| (8) Transmission Input Gear Transfer Case | |
The transmission input gear transfer case is attached to the transmission. The input gear transfer case houses the torque converter. The input gear transfer case transfers power through gearing to drive oil pumps.
Transmission Output Gear Transfer Case
| |
| Illustration 10 | g03661258 |
| (9) Transmission Output Gear Transfer Case | |
The transmission output gear transfer case is connected to the front of the transmission. The transmission output gear transfer case houses gearing the transfers power from the transmission to output shafts.
| |
| Illustration 11 | g03661269 |
|
(10) Front Axle
(11) Oscillating Axle (Rear) | |
| |
| Illustration 12 | g03661270 |
| (12) Oil cooler | |
The oil cooler is located on the left side of the engine.