C13 Tier 4 Final Engines Caterpillar


Temperature Sensor (Catalyst Inlet)

Usage:

730C2 2T4


Illustration 1g03454419

Table 1
Specification for 373-5283 Temperature Sensor 
Item  Qty  Part  Specification Description 
Final installation torque for the temperature sensor is 45 ± 5 N·m (33 ± 4 lb ft)
Operating voltage is 4.75 to 5.25 VDC.
Output type is Analog.

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Air Compressor
C15 and C18 Engines for Caterpillar Built Machines Valve Rocker Arm
C13, C15, and C18 Tier 4 Final Engines Engine Support (Front)
C9.3 Tier 4 Final Engines Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator Oil Diverter Valve
C13, C15, and C18 Tier 4 Final Engines Variable Valve Actuator
Command for Underground Machine Usage - Report
R1600H Load Haul Dump Diesel Particulate Filter - Inspect
R1700G Load Haul Dump Diesel Particulate Filter - Inspect
R3000H Load Haul Dump Diesel Particulate Filter - Inspect
R3000H Load Haul Dump Transmission Oil - Change
C9.3 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Engine Oil Pan
C9.3 Tier 4 Final Engines Diesel Particulate Filter
C9.3 Tier 4 Final Engines Camshaft
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Electronic Control (Hydraulic System)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Brake Charging) (Implement, Steering Pilot) (Clean Emissions Module Fan)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Combination Valve - (Brake Charging) (Implement, Steering Pilot) (Clean Emissions Module Fan)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Hydraulic System
797 Off-Highway Truck Powered Stairway - Check
2014/03/31 Special Instruction, REHS7992, "Procedure to Install the Working at Heights Retrofit Kit on the 789D Off-Highway Truck" has been Updated {0635, 0679, 6922, 7051, 7255, 7256, 7509}
C7 Engine for Caterpillar Built Machine Inlet Air Temperature Sensor - Remove and Install
725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 725C and 725C2 Articulated Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.