1998/12/07 Caterpillar


Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications {0700}

Usage:


All Models

Warranty: G

Features/Benefits

* Used to apply force for pulling or pushing applications
* Used with 3H-0470 Screw (1-1/2-12 x 17.25 long), 3H-0466 Nut, and 3H-0467 Washer or with hydraulic cylinder
* 50 ton capacity

Specifications/Technical Information

Spread - 215.9 to 520.7 mm (8.50 to 20.50 in)
Reach - 609.9 mm (24.0 in)
Capacity - 50 Ton
Center hole diameter - 42.9 mm (1.69 in)
Thread size (push/pull leg) - 1.25-12


149-5138 Puller Assembly, 50 Ton

(1) 150-1784 Block, Cross
(2) 150-1785 Leg, Push Puller [609.9 mm (24.0 in) reach]
(3) 150-1961 Washer, Leg
(4) 7H-7539 Nut, Hex (1.25-12 thread)
(5) 150-1786 Plate, Slide

Caterpillar Information System:

1998/12/07 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits {0115}
1998/12/07 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil {5720,0800}
1998/12/07 Use 144-0235 Belt Tension Gauge to Check Belt Tension {1357}
1998/12/07 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil {5050,5095,3030,3080}
1998/12/07 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics {1000,3000,4000,5000,6000,0788}
1998/12/07 Identification Of External Terminals On Alternators {1405,1406,1400}
1998/11/30 Proper Flushing And Charging Of Air Conditioner Refrigerant System {7320}
1998/11/23 New 158-4991 Cat Mini Multi-Tool Now Available {1404}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/12/07 Use 150-1782 Crossblock For 8B-7548 Push Puller
1998/12/07 Use 153-8537 A/C Component To Flush Air Conditioning Systems And Recycle Solvent {0757}
1998/12/07 Improved Battery Cable Available {1402}
1998/12/07 Use 143-4062, 143-4065, 143-4066 Auto ID Pressure Sensors With DataView {1000,3000,4000,5000,6000,0788}
1998/12/07 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView {1000,3000,4000,5000,6000,0788}
1998/12/28 Use 1Y-3904 Clear Adhesive Sealant For O-Ring Assembly{0649}
1998/12/28 Use 160-0772, 160-0774/ And 160-0775 Wire Brushes For Tough Cleaning Jobs{0674}
1999/01/18 Service Literature Index For Starting Motors And Alternators {1405,1453}
1999/02/01 Procedure For Assembly And Installation Of Conventional Duo-Cone Seals Is Now Available{7561}
1999/02/08 Correct Seal Usage Improves Service Life {7555}
1999/02/22 Shielded Metal Arc Welding And Flux Cored Arc Welding Information {0679}
1999/03/08 Use 157-3719 Spanner For Removing And Installing Bosch Fuel Pumps {1251}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.