C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar


Connecting Rod Bearing Journal

Usage:

CB-22B 2B2

Table 1
Diameter of the C1.5 and C2.2 Connecting Rod Bearing Journals 
Journals  Diameter  Service limit 
Standard  51.964 to 51.975 mm (2.04582 to 2.04626 inch)  51.90 mm (2.0433 inch) 
Undersize 0.25 mm (0.010 inch)  51.714 to 51.725 mm (2.03598 to 2.03641 inch)  51.65 mm (2.0335 inch) 
Undersize 0.50 mm (0.020 inch)  51.464 to 51.475 mm (2.02614 to 2.02660 inch)  51.40 mm (2.0236 inch)(1) 
(1) If the diameter of the connecting rod bearing journal is less than the maximum undersize service limit, the crankshaft must be replaced.

Clearance between the connecting rod bearing and the connecting rod bearing journal

Standard clearance

C1.5 and C2.2 ... 0.035 to 0.085 mm (0.00138 to 0.00335 inch)
Service limit ... 0.20 mm (0.0079 inch)

Caterpillar Information System:

C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
Certain Parts are Not Shipped on Components for 789D Off-Highway Trucks{4257, 4305, 7000, 7201, 7213, 7540} Certain Parts are Not Shipped on Components for 789D Off-Highway Trucks{4257, 4305, 7000, 7201, 7213, 7540}
CD54B Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral - Test and Adjust - Solid Drum
Cat® Terrain for Track-Type Tractor with Blade Control Safety
770G and 772G Off-Highway Truck Systems Electronic Control (Steering System)
770G and 772G Off-Highway Truck Systems Electronic Control (Automatic Lubrication System)
CD54B Vibratory Asphalt Compactor Machine Systems Pump Control (Electronic Displacement Control) Neutral - Test and Adjust - Split Drum
2014/06/20 New Monitor Software Is Now Available for VIMS ABL2M ECM on Certain Cat® Off-Highway Trucks {7601, 7620}
3500 Marine Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Block
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is Low
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Water Temperature Regulator
2012/12/21 New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051} Repair Instructions for Control Valve Section Body on Certain H Series and K Series Motor Graders{5051}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
CD54B Vibratory Asphalt Compactor Machine Systems Water Spray Pump Flow - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.