Parking Brake - Remove and Install
Removal Procedure
- Pull floor mat (2) away from cover (1) to expose the screws (3) .
Show/hide table
Illustration 1 | g03652736 |
- Remove screws (3) and cover (2) .
- Remove clip (4) and pin (5) . Squeeze clip (7) together. Pull cable (6) out of the parking brake assembly.
Show/hide table
Illustration 2 | g00770627 |
- Remove four bolts (9) and parking brake lever assembly (8) .
Show/hide table
Illustration 3 | g03652737 |
- Remove clips (10) and pins (11) on both LH and RH sides. Separate cable assembly (13) from both levers (12) .
Show/hide table
Illustration 4 | g03652738 |
Installation Procedure
- Connect cable assembly (13) to both levers (12) . Install pins (11) and clips (10) on both LH and RH sides.
Show/hide table
Illustration 5 | g03652738 |
- Install parking brake lever assembly (8) and install four bolts (9) .
Show/hide table
Illustration 6 | g03652737 |
- Install cable (6) in the parking brake assembly. Expand clip (7) .
Show/hide table
Illustration 7 | g00770627 |
- Install pin (5) and clip (4) .
- Install cover (1) and screws (3) .
Show/hide table
Illustration 8 | g03652736 |
- Reposition floor mat (2) .
Caterpillar Information System:
424B and 424B HD Backhoe Loaders Power Train Drive Shaft (Rear) - Remove and Install
Alternator - Bosch K1/N1 Alternator - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
2012/09/19 New Adapter Bearing Is Now Used for Blower Fan Group on 795F AC Off-Highway Trucks {1636, 4017, 7551}
2012/09/28 A New Special Instruction to Install the Front Wheel Site Glass Retrofit Kit on Certain Off-Highway Trucks is Now Available {4006, 4205, 7479}
Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620} Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620}
559C and 579C Knuckleboom Loaders Piston Pump (Implement)
MH3049 Material Handler Hydraulic System Relief Valve (Hydraulic Oil Warming) - Test and Adjust
521B and 522B Track Feller Bunchers Machine Systems Travel Motor - Remove and Install
Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000} Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000}
PL87 Pipelayer TA2 Technical Inspection{7000, 753T} PL87 Pipelayer TA2 Technical Inspection{7000, 753T}
2012/09/13 A New Oil Filter Base Is Used on Certain Commercial Engines {1306, 1308}
2384C and 2484C Knuckleboom Loaders System Schematic
C175-16 and C175-20 Locomotive Engines Idler Gears (Front) - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Flywheel Housing - Install
2012/09/27 New VIMS 3G Application Software Is Now Used On Certain 793F, 795F, and 797F Off-Highway Truck/Tractors {7601, 7620}
C175-16 and C175-20 Locomotive Engines Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Bearing Clearance - Check
MH3049 Material Handler Lifting Capacities
C175-16 and C175-20 Locomotive Engines Crankshaft Main Bearings - Install
C175-16 and C175-20 Locomotive Engines Camshaft Bearings - Remove
C175-16 and C175-20 Locomotive Engines Camshaft Bearings - Install
559C and 579C Knuckleboom Loaders Stabilizer System