Drive Shaft (Rear) - Remove and Install
Removal Procedure
- Remove four bolts (3) and two collars (1) .
Show/hide table
Illustration 1 | g03652743 |
Note: Do not reuse bolts (3) . Discard bolts (3) and replace with new bolts.
- Repeat Step 1 for the opposite side.
- Remove rear drive shaft (2) .
Installation Procedure
- Install rear drive shaft (2) . Install two collars (1) and four new bolts (3) .
Show/hide table
Illustration 2 | g03652743 |
- Tighten bolts (3) in the sequence that is indicated.
Show/hide table
Illustration 3 | g03230977 |
- Repeat Steps 1 and 2 for the opposite side.
Caterpillar Information System:
Alternator - Bosch K1/N1 Alternator - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
2012/09/19 New Adapter Bearing Is Now Used for Blower Fan Group on 795F AC Off-Highway Trucks {1636, 4017, 7551}
2012/09/28 A New Special Instruction to Install the Front Wheel Site Glass Retrofit Kit on Certain Off-Highway Trucks is Now Available {4006, 4205, 7479}
Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620} Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620}
559C and 579C Knuckleboom Loaders Piston Pump (Implement)
MH3049 Material Handler Hydraulic System Relief Valve (Hydraulic Oil Warming) - Test and Adjust
521B and 522B Track Feller Bunchers Machine Systems Travel Motor - Remove and Install
Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000} Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000}
PL87 Pipelayer TA2 Technical Inspection{7000, 753T} PL87 Pipelayer TA2 Technical Inspection{7000, 753T}
MH3049 Material Handler Hydraulic System Flow Diverter Valve (Optimal Turning) - Adjust
424B and 424B HD Backhoe Loaders Power Train Parking Brake - Remove and Install
2012/09/13 A New Oil Filter Base Is Used on Certain Commercial Engines {1306, 1308}
2384C and 2484C Knuckleboom Loaders System Schematic
C175-16 and C175-20 Locomotive Engines Idler Gears (Front) - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Flywheel Housing - Install
2012/09/27 New VIMS 3G Application Software Is Now Used On Certain 793F, 795F, and 797F Off-Highway Truck/Tractors {7601, 7620}
C175-16 and C175-20 Locomotive Engines Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine Bearing Clearance - Check
MH3049 Material Handler Lifting Capacities
C175-16 and C175-20 Locomotive Engines Crankshaft Main Bearings - Install
C175-16 and C175-20 Locomotive Engines Camshaft Bearings - Remove
C175-16 and C175-20 Locomotive Engines Camshaft Bearings - Install