Fan Drive - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
| B | 8T-1807 | Bearing Lubricant | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Apply Tooling (B) to the outside of shaft (9) .
Show/hide table
 | |
| Illustration 1 | g01176172 |
Show/hide table
 | |
| Illustration 2 | g03151137 |
Note: Cool the shaft before pressing bearing onto the shaft.
- Use Tooling (A) and a suitable press. Position bearing (7) and press into retainer (8) and onto shaft (9) .
- Install bolts (5) and plate (6) into shaft (9). Tighten bolts (5) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
- Install shaft assembly (4), bolts (2), and washers (3) into fan drive bracket (1). Tighten bolts (2) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Show/hide table
 | |
| Illustration 3 | g01176090 |
End By: Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Caterpillar Information System:
MH3049 Material Handler C9 Engine Supplement Fan Drive - Disassemble
789D and 789D XQ Off-Highway Trucks Engine Supplement Belt Tightener - Remove and Install
2012/07/09 A New Special Instruction to Inspect and Repair the Hydraulic Tank Tube Assembly on Certain 793 Off-Highway Trucks is Now Available {0679, 5056}
2012/07/23 The Service and Parking Brake Group Has Been Improved on 777G Off-Highway Trucks {4251, 4267}
CB54B Vibratory Asphalt Compactor Machine Systems Relief Valve (Main) - Test and Adjust - Vibratory, Solid Drum
MH3049 Material Handler C9 Engine Supplement Fan Drive - Remove and Install
2012/07/04 Air Cooling Duct Group is Improved on the 795F AC Off-Highway Truck {4017}
C7.1 Industrial Engine Before Starting Engine
424B and 424B HD Backhoe Loaders Engine Supplement Side Panel - Remove and Install
424B Backhoe Loader Hydraulic and Steering System Control Valve (Auxiliary)(Loader) (Mechanically Operated)
424B and 424B HD Backhoe Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove and Install
R1600H Load Haul Dump Power Train Starting System
2012/11/15 Inspect the Cab Mounting Bolts on 773F, 775F, and 777F Off-Highway Trucks {7266, 7301, 7301}
MH3049 Material Handler C9 Engine Supplement Fan - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Battery Disconnect Switch
789D and 789D XQ Off-Highway Trucks Engine Supplement Refrigerant Condenser - Remove and Install
2470C Wheel Feller Buncher Sound Information and Vibration Information
2470C Wheel Feller Buncher Lifting and Tying Down the Machine
2470C Wheel Feller Buncher Lubricant Viscosities
789D and 789D XQ Off-Highway Trucks Engine Supplement Fuel Priming Pump - Remove and Install
2470C Wheel Feller Buncher Engine Air Filter Primary Element - Clean/Replace
2470C Wheel Feller Buncher Engine Oil and Filter - Change
2470C Wheel Feller Buncher Reference Material
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500} Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}