Bank Valve - Install - Front Frame
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 311-1362 | Vacuum Cap | 1 |
| B | 138-7573 | Link Bracket | 2 |
- Use Tooling (B) and a suitable lifting device in order to install bank valve (13). The weight of bank valve (13) is approximately 73 kg (160 lb).
Show/hide table
 | |
| Illustration 1 | g01430964 |
- Install bolts (16), bolts (15), and bolt (14) .
Show/hide table
 | |
| Illustration 2 | g01430857 |
Show/hide table
 | |
| Illustration 3 | g01430860 |
- Remove Tooling (B) and the suitable lifting device.
Show/hide table
 | |
| Illustration 4 | g01430852 |
- Connect tube assembly (12) .
Show/hide table
 | |
| Illustration 5 | g01430845 |
- Connect tube assembly (11). Connect tube assembly (10). Connect tube assemblies (9) .
Show/hide table
 | |
| Illustration 6 | g01430802 |
- Connect hose assemblies (8) and hose assemblies (7) .
Show/hide table
 | |
| Illustration 7 | g01430795 |
- Connect harness assembly (6). Repeat this step for the opposite side.
- Connect tube assemblies (5) and tube assemblies (4) .
- Use two people in order to install cover (3). The weight of cover (3) is approximately 32 kg (70 lb). Install bolts (2). Tighten bolts (1) .
Show/hide table
 | |
| Illustration 8 | g01430785 |
- Remove Tooling (A) .
Show/hide table
 | |
| Illustration 9 | g02732239 |
Caterpillar Information System:
120M Series 2 and 120M2 Motor Graders Machine Systems Bank Valve - Remove - Front Frame
120M Series 2 and 120M2 Motor Graders Machine Systems Bank Valve - Install - Rear Frame
120M Series 2 and 120M2 Motor Graders Machine Systems Bank Valve - Remove - Rear Frame
521B and 522B Track Feller Bunchers Machine Systems Swing Motor
2012/04/20 A Magnetic Plug Is Available for the High-Pressure Fuel Pump on C175 Engines in Off-Highway Trucks {1251}
CP56B, CP68B, CP74B, CS56B, CS66B, CS68B, CS74B, CS76B and CS78B Vibratory Soil Compactors Engine Supplement Engine - Remove and Install
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2201 - FMI 14
521B and 522B Track Feller Bunchers Machine Systems Main Control Valve (6-Bank) - High Flow) (Tilt
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2201 - FMI 13
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2201 - FMI 08
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2201 - FMI 04
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 2201 - FMI 03
521B and 522B Track Feller Bunchers Machine Systems Swing Drive
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0590 - FMI 09
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 0590 - FMI 14
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 1273 - FMI 14
793F CMD Off-Highway Truck (Command for Hauling) Power Train Electronic Control System MID 081 - CID 1273 - FMI 09
R1600H Load Haul Dump Power Train Cab Mounting
R3000H Load Haul Dump Battery Disconnect Switch
R3000H Load Haul Dump Backup Alarm
120M Series 2 Motor Grader Engine Supplement Aftercooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
120M Series 2 and 120M2 Motor Graders Machine Systems Articulation Cylinder - Remove and Install - Left Side