Stopping the Engine
Show/hide table
| NOTICE |
|---|
|
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components. Avoid accelerating the engine prior to shutting it down. Avoiding hot engine shutdowns will maximize turbocharger shaft and bearing life. |
Note: Individual applications will have different control systems. Ensure that the shutoff procedures are understood. Use the following general guidelines in order to stop the engine.
- Remove the load from the engine. Reduce the engine speed (rpm) to low idle. Allow the engine to idle for 5 minutes in order to cool the engine.
- Stop the engine after the cool down period according to the shutoff system on the engine and turn the ignition key switch to the OFF position. If necessary, refer to the instructions that are provided by the OEM.
- Wait 60 seconds before the battery disconnect switch is turned off. The engine ECM required power after the keyswitch is turned off.
Caterpillar Information System:
R1600H Load Haul Dump Capacities (Refill)
R1600H Load Haul Dump Lubricant Viscosities - Fluids Recommendations
R1600H Load Haul Dump Brake Release - If Equipped
R1600H Load Haul Dump Parking Brake Manual Release
R1600H Load Haul Dump Lifting and Tying Down the Machine
R1600H Load Haul Dump Equipment Lowering with Engine Stopped
R1600H Load Haul Dump Stopping the Engine if an Electrical Malfunction Occurs
R1600H Load Haul Dump Stopping the Engine
R1600H Load Haul Dump Stopping the Machine
R1600H Load Haul Dump Secondary Steering - If Equipped
Command For Underground Stopping the Engine
R1600H Load Haul Dump Fuel Shutoff Valve - If Equipped
An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203} An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203}
C27 and C32 Engines for Caterpillar Built Machines System Overview
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709} Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180} Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700} Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
777G Off-Highway Truck Operator Controls
777G Off-Highway Truck Braking
Command For Underground Engine and Machine Warm-Up
Command For Underground Display Tools
Command For Underground Glossary
Command For Underground Barrier Control Panel Isolation Switch
Command For Underground Machine Shutdown Control