3100 HEUI TRUCK ENGINE Caterpillar


Inlet Air Heater

Usage:


Section View Of Heater Assembly (Dual Tube Inlet Manifold)

(1) Heater assembly.

(2) Tighten nut to a torque of ... 13 ± 1 N·m (10 ± 1 lb ft)

NOTE: When assembling inlet air heater to intake manifold and air inlet elbow, clean inlet air heater joint faces with solvent. Apply 6V1541 Quick Cure Primer to joint faces. Allow primer to dry three to five minutes minimum. Apply 1U8846 Gasket Maker to joint face and spread uniformly. Heater must be assembled and tightened within ten minutes.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.