Flywheel Housing Runout
Usage:
Face Runout (Axial Eccentricity) Of The Flywheel Housing:
8T5096 Dial Indicator Group Installed (Typical Example)
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With the dial indicator set at 0.0 mm (.000 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C) and (D).
4. The difference between the lower and higher measurements taken at all four points must not be more then 0.30 mm (.012 in), which is the maximum permissible face runout (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3100 HEUI TRUCK ENGINE Flywheel Runout
3100 HEUI TRUCK ENGINE Flywheel Housing
3100 HEUI TRUCK ENGINE Flywheel
3100 HEUI TRUCK ENGINE Front Housing Cover
3100 HEUI TRUCK ENGINE Front Housing
3100 HEUI TRUCK ENGINE Front Gear Group
3100 HEUI TRUCK ENGINE Connecting Rod And Main Bearing Journals
3100 HEUI TRUCK ENGINE Pistons And Rings
3100 HEUI TRUCK ENGINE Connecting Rod
3100 HEUI TRUCK ENGINE Crankshaft Pulley Group
3100 HEUI TRUCK ENGINE Crankshaft
3100 HEUI TRUCK ENGINE Crankshaft Seals
3100 HEUI TRUCK ENGINE Flywheel Housing Bore
3100 HEUI TRUCK ENGINE Electronic Control Group (Wiring And Sensors)
3100 HEUI TRUCK ENGINE Adapter Group (Engine To Transmission)
3100 HEUI TRUCK ENGINE Electric Starting Motor
3100 HEUI TRUCK ENGINE Alternator
3100 HEUI TRUCK ENGINE Regulator
3100 HEUI TRUCK ENGINE Inlet Air Heater
3100 HEUI TRUCK ENGINE Ether Starting Aid
3100 HEUI TRUCK ENGINE Wiring Group (Inlet Air Heater)
3100 HEUI TRUCK ENGINE Air Compressor
3100 HEUI DIESEL TRUCK ENGINE ENGINES EQUIPPED WIT Systems Operation
3100 HEUI DIESEL TRUCK ENGINE ENGINES EQUIPPED WIT Testing And Adjusting