320E and 323E Excavators Machine System Specifications Caterpillar


Drift Reduction Valve

Usage:

320E AWS


Illustration 1g02572916

Table 1
Specification for 335-0200 Load Control Valve Gp 
Item  Qty  Part  Specification Description 
486-3207 Pilot Relief Valve Gp  Torque to 95 ± 14 N·m (70 ± 10 lb ft)
335-0203 Plug  Torque to 170 ± 15 N·m (125 ± 11 lb ft)
5I-8511 Spring  Length under test force is 33.0 mm (1.30 inch).
Test force is 23.128 ± 1.850 N (5.199 ± 0.416 lb).
Free length after test is 61.4 mm (2.42 inch)
162-0177 Plug As  Torque to 35 to 39 N·m (26 to 29 lb ft)
087-5166 Spring  Length under test force is 52.0 mm (2.05 inch).
Test force is 12.858 N (2.891 lb).
Free length after test is 70.0 mm (2.76 inch)
095-1594 O-Ring Seal  Lubricate the O-ring seal lightly with the lubricant that is being sealed. 
095-1789 Ring  Lubricate the ring lightly with the lubricant that is being sealed. 
8T-4136 Bolt  Torque to 55 ± 10 N·m (41 ± 7 lb ft)
225-4818 Plug As  Torque to 10 ± 1 N·m (89 ± 9 lb in)

Caterpillar Information System:

HH44 DE Harvester Head Feed Roller Arm Control
HH44 DE Harvester Head Piston Motor (Feed Roller)
HH44 DE Harvester Head Cutoff System
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150} Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
558 Forest Machine Machine System Specifications Fasteners - Swing Drive
2013/09/20 An Improved Plate Assembly Is Used for the Water Manifold Shield Group on 793 Off-Highway Trucks with High Displacement Engines {1067, 1362}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950} Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0627 - FMI 04
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0627 - FMI 03
2011/01/06 A New Exhaust Plug Is Used on Certain C18 Engines {1058, 1061}
HH44 DE Harvester Head Bank Valve (Main Hydraulic)
HH44 DE Harvester Head Saw Bar Home Sensor
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093} Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
770G and 772G Off-Highway Truck (OEM) Automatic Lubrication System General Information
HH44 DE Harvester Head Preparation for Troubleshooting
HH44 DE Harvester Head Visual Inspection
Troubleshooting the Hydraulic Electronic Unit Injection (HEUI) Fuel System On C7 and C9 Engines{1250} Troubleshooting the Hydraulic Electronic Unit Injection (HEUI) Fuel System On C7 and C9 Engines{1250}
521B and 522B Track Feller Bunchers Machine Systems Hydraulic and Fuel Tank
2011/01/10 A Dye was Added to the Hydraulic Oil and Engine Coolant Fluid on Certain Caterpillar Products {1300, 1348, 5050, 5095}
AP1000E, AP1055E, BG1000E and BG1055E Asphalt Pavers Monitoring System System Schematic
568 Forest Machine Machine System Specifications Travel Counterbalance Valve
2011/01/06 Relocating the Engine Oil Filter on Certain 24M Motor Graders {1306, 1308}
Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290} Replacing the Fuel Injection Pump on Certain C9.3 Engines {1251, 1290}
Bench Test Procedure for a 735B, 740B, and 740B Ejector Articulated Dump Truck Transmission{3030, 3073, 3139, 3167} Bench Test Procedure for a 735B, 740B, and 740B Ejector Articulated Dump Truck Transmission{3030, 3073, 3139, 3167}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.