777G Off-Highway Truck Power Train Caterpillar


Speed Sensor (Transmission Intermediate)

Usage:

777G GT7



Illustration 1g02288655

View of the right side of the transmission

(1) Speed sensor (transmission intermediate)

Transmission intermediate speed sensor is located on the right side of the planetary gears of the transmission.

The transmission intermediate speed sensor receives power from the Chassis Electronic Control Module (Chassis ECM). The sensor uses the power from the Chassis ECM in order to send a signal back to the Chassis ECM. The gear for the transmission speed sensor has 46 teeth. The gear for speed sensor (1) is part of the planetary transmission.

The number of teeth on the gear will determine the signals that are sent by speed sensor (1) to the Chassis ECM. The signal informs the Chassis ECM of the transmission input shaft speed.

The information that speed sensor (1) sends to the Chassis ECM is for the adaptive shifting strategy. The adaptive shifting strategy improves the shift quality and maximizes clutch durability.

Caterpillar Information System:

CB54B Vibratory Asphalt Compactor Towing the Machine - Solid Drum
C6.6 Industrial Engine Exhaust Cooler (NRS) - Test
CD44B and CD54B Vibratory Asphalt Compactors Stopping the Machine
C3.4B Engines Engine Shutdown Occurs Intermittently
C3.4B Engines Engine Has Mechanical Noise (Knock)
C3.4B Engines Engine Does Not Crank
C3.4B Engines Electronic Service Tool Does Not Communicate
Salvage of Outer Planetary Carrier Pin Bores, Using Metal Spray and Machining Operations for 793 Off-Highway Trucks{4001, 4008, 4050} Salvage of Outer Planetary Carrier Pin Bores, Using Metal Spray and Machining Operations for 793 Off-Highway Trucks{4001, 4008, 4050}
2010/10/19 A New Ride Control Accumulator is Now Available for R1600 Load Haul Dump Machines {5077}
2010/10/19 A New Brake Accumulator is Now Available for R2900 and R2900G Load Haul Dump Machines, and AD45 Underground Articulated Trucks {4263}
2010/10/19 A New Ride Control Accumulator is Now Available for R1700G and R2900G Load Haul Dump Machines {5077}
770G and 772G Off-Highway Truck Systems Speed Sensor (Transmission Intermediate)
770G and 772G Off-Highway Truck Machine Systems Blower Motor - Remove and Install
2010/10/20 Installation of Back Pressure Valve in the Return Line on Medium Wheel Loader Machines {5057, 5057, 5067}
C9.3 Tier 4 Final Engines Pressure Sensor (NOx Reduction System)
C9.3 Tier 4 Final Engines Temperature Sensor (NOx Reduction System)
CAESultra Position Error
770G and 772G Off-Highway Truck Machine Systems Accelerator Control - Remove and Install
HH44 DE Harvester Head Dasa4 Control System Creating New Bucking Instructions
770G and 772G Off-Highway Truck Safety Messages
R2900G Load Haul Dump Remote/Autonomous Control Switch - If Equipped
C6.6 Industrial Engine Fuel Filter Base - Twin Secondary Fuel Filter Base
C6.6 Industrial Engine Pressure Sensor (NOx Reduction System)
C6.6 Industrial Engine Temperature Sensor (NOx Reduction System)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.