Flywheel Housing Runout
Usage:
Face Runout (Axial Eccentricity) Of The Flywheel Housing:
8T5096 Dial Indicator Group Installed
1. Fasten a dial indicator to the crankshaft flange so the anvil of the indicator will touch the face of the flywheel housing.
2. Put a force on the crankshaft toward the rear before reading the indicator at each point.
3. With dial indicator set at 0.0 mm (.00 in) at location (A), turn the crankshaft and read the indicator at locations (B), (C) and (D).
4. The difference between lower and higher measurements taken at all four points must not be more than 0.38 mm (.015 in), which is the maximum permissible face runout (axial eccentricity) of the flywheel housing.
Caterpillar Information System:
3406C INDUSTRIAL & MARINE ENGINES Flywheel Housing Bore
3406C INDUSTRIAL & MARINE ENGINES Flywheel Adapter Group
3406C INDUSTRIAL & MARINE ENGINES Flywheel
3406C INDUSTRIAL & MARINE ENGINES Flywheel Housing
3406C INDUSTRIAL & MARINE ENGINES Flywheel Housing Cover
3406C INDUSTRIAL & MARINE ENGINES Crankshaft
3406C INDUSTRIAL & MARINE ENGINES Connecting Rod And Main Bearing Journals
3406C INDUSTRIAL & MARINE ENGINES Connecting Rods
3406C INDUSTRIAL & MARINE ENGINES Pistons And Rings
3406C INDUSTRIAL & MARINE ENGINES Cylinder Liner Projection
3406C INDUSTRIAL & MARINE ENGINES Cylinder Liners
3406C INDUSTRIAL & MARINE ENGINES Cylinder Block
3406C INDUSTRIAL & MARINE ENGINES Flywheel Runout
3406C INDUSTRIAL & MARINE ENGINES Magnetic Pickup Group
3406C INDUSTRIAL & MARINE ENGINES Alternator Mounting Group
3406C INDUSTRIAL & MARINE ENGINES Alternator And Regulator
3406C INDUSTRIAL & MARINE ENGINES Electric Starting Motor
3406C INDUSTRIAL & MARINE ENGINES Starting Motor Solenoids
3406C INDUSTRIAL & MARINE ENGINES Shutoff Solenoids
3406C INDUSTRIAL & MARINE ENGINES Air Starting Motor Pressure Regulating Valve
3406C INDUSTRIAL & MARINE ENGINES Temperature Sensor
3406C INDUSTRIAL & MARINE ENGINES Service Meter
3406C INDUSTRIAL & MARINE ENGINES Systems Operation
3406C INDUSTRIAL & MARINE ENGINES Testing & Adjusting