Metering Pump (Steering) - Remove and Install
拆卸步骤
Show/hide table
 |
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后，液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前，如果不事先释放压力，可能会造成严重伤害。 卸下液压系统的部件或管路时，确保所有的作业机具都已降到地面上，而且液压油温度已冷。 只能在发动机停机，并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修机器时，务必小心，确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器，请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 根据当地法规处置所有液体。 |
注: 为便于安装，在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。
- 将断路开关转到断开位置。
- 拆下螺栓 (1) 和盖 (2) 。
Show/hide table
 | |
| 图 1 | g02155425 |
- 拆下螺栓 (4) 和盖 (3) 。
- 将软管组件 (7) 从计量泵 (6) 上断开。
Show/hide table
 | |
| 图 2 | g02155426 |
- 拆下螺栓 (5) 和计量泵 (6) 。
安装步骤
- 安装计量泵 (6) 和螺栓 (5) 。
Show/hide table
| | |
| 图 3 | g02155426 |
- 将软管组件 (7) 连接至计量泵 (6) 。
- 安装盖 (3) 和螺栓 (4) 。
Show/hide table
| | |
| 图 4 | g02155425 |
- 安装盖 (2) 和螺栓 (1) 。
- 将断路开关转到接通位置。
Caterpillar Information System:
C4.4 Industrial Engine Flexible Exhaust Pipe
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155} Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
C7.1 Industrial Engine Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine Air Compressor - Remove and Install - Twin Cylinder Compressor
C7.1 Industrial Engine Air Compressor - Remove and Install - Single Cylinder
C7.1 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "B"
C4.4 Industrial Engine Crankshaft
773G and 775G Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
Cat® Detect 12 Radar Object Detection System, Software Version 3 Safety
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Regulatory Compliance
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Object Detection Sensor - Clean/Inspect
797F and 797 XQ Off-Highway Trucks Engine Supplement Turbocharger - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Hydraulic System Troubleshooting
AS3301C Asphalt Screed Safety Messages
Brake Wear Indicators Upgrade and Retrofit Now Available on Certain Off-Highway Trucks{4251, 4255, 7450} Brake Wear Indicators Upgrade and Retrofit Now Available on Certain Off-Highway Trucks{4251, 4255, 7450}
2011/03/11 Brake Wear Indicators Upgrade and Retrofit Now Available on Certain Off-Highway Trucks {4251, 4255, 7450}
773G and 775G Off-Highway Truck Power Train Position Switch (Truck Body)
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems Hydrostatic System Troubleshooting
C9.3 Tier 4 Final Engines Exhaust Manifold
770G, 772G, 773E, 777E and 777G Off-Highway Trucks and 773G and 775G Quarry Trucks Monitoring System MID 053 - CID 1089 - FMI 02
770G, 772G, 773E, 777E and 777G Off-Highway Trucks and 773G and 775G Quarry Trucks Monitoring System MID 053 - CID 1089 - FMI 09
770G, 772G, 773E, 777E and 777G Off-Highway Trucks and 773G and 775G Quarry Trucks Monitoring System MID 053 - CID 1089 - FMI 14
770G, 772G, 773E, 777E and 777G Off-Highway Trucks and 773G and 775G Quarry Trucks Monitoring System Diagnostic Capabilities