Lift Cylinder
Show/hide table
 | |
| Illustration 1 | g03662682 |
Show/hide table
| Specification for 293-5705 Lift Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| Bores must be free of paint. Use 5P-0960 Grease Cartridge to lubricate all the bores. | |||
| 1 | 2 | 162-0177 Plug As | Before tightening, clean threads. Torque to 25 N·m (221 lb in). |
| A | 1 | 295-3865 Cylinder As | Bore is 50 mm (2.0 inch). |
| B | 1 | 295-3157 Rod As | Diameter is 35 mm (1.4 inch). |
| 2 | 1 | 9X-6611 Socket Setscrew | Apply Loctite 243 to threads. Torque to 25 ± 5 N·m (221 ± 44 lb in). |
| 3 | 1 | 292-8950 Piston | Before tightening, clean threads. Torque to 300 ± 25 N·m (221 ± 18 lb ft). |
| 4 | 1 | 140-2377 U-Cup Seal | Lubricate the sealing lip lightly with lubricant that is being sealed. |
| 5 | 1 | 140-2392 Lip Type Seal | Lubricate the sealing lip lightly with lubricant that is being sealed. |
| C | - | - | Bore of cap end is 31.75 mm (1.250 inch). |
| D | - | - | Bore of rod eye is 31.75 mm (1.250 inch). |
| 6 | 1 | 296-5140 Wear Ring | Before assembly, apply Loctite 638 to wear band groove. |
| 7 | 1 | 292-8952 Head | Lubricate threads lightly with oil and tighten to 325 ± 25 N·m (240 ± 18 lb ft). |
| 8 | - | - | Before assembly, apply green Loctite 609 to wiper seal groove. |
| E | - | - | Length of stroke is 653.0 ± 1.5 mm (25.71 ± 0.06 inch). |
| F | - | - | Closed length is 868.00 ± 1.75 mm (34.173 ± 0.069 inch). |
Caterpillar Information System:
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Track - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Lift Cylinder
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Secondary Filter - Replace
735B and 740B Articulated Trucks Hydraulic Tank Breather - Replace - Hoist/Brake/Steering
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Remove
C27 and C32 Engines for Caterpillar Built Machines Exhaust Pipe
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 14
735B and 740B Articulated Trucks Fuel Tank Cap and Strainer - Clean
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 09
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 02
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Lift Cylinder
773G and 775G Quarry Trucks Braking System Automatic Retarder - Calibrate
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Lift Cylinder
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Lift Cylinder
777G Off-Highway Truck/Tractor Braking System Differential Cooler - Configure
C15 and C18 Petroleum Generator Sets Rotating Rectifier - Inspect/Test
CAESultra Site Data Flow
C27 and C32 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
2010/04/22 Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
CAESultra System Components
C27 and C32 Engines for Caterpillar Built Machines Event Codes
CAESultra D3:C4 Nav 10.4 Display