797F and 797 XQ Off-Highway Trucks Engine Supplement Caterpillar


Refrigerant Condenser - Remove and Install

Usage:

797F LAJ

Removal Procedure

Start By:

  1. If equipped, remove the front grill.

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.


  1. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant". Refer to Special Publication, NEDG2500, "Air Conditioning Tools" for the correct procedure.


    Illustration 1g02145481

  2. Remove grill (1).


    Illustration 2g02145489

  3. Disconnect hose assembly (2) and hose assembly (3). Remove bolts (4). Remove refrigerant condenser (5).

Installation Procedure

  1. Install refrigerant condenser (5) in the reverse order of removal.

Caterpillar Information System:

525D, 535D, 545D, 555D Wheel Skidder Engine and Machine Warm-Up
735B and 740B Articulated Trucks Capacities (Refill)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relay (Secondary Steering Motor)
797F and 797 XQ Off-Highway Trucks Engine Supplement Radiator - Assemble
797F and 797 XQ Off-Highway Trucks Engine Supplement Radiator - Disassemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Engine Supplement Engine Enclosure - Remove and Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Engine Supplement Battery and Battery Cable - Separate and Connect
2010/04/16 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Commercial Engines {1261, 1274, 5067}
2010/04/15 A New Torque Is Used for Installing the Check Valve Gp into the Secondary Fuel Filter Base on Certain Machine Engines {1261, 1274, 5067}
735C and 745C Articulated Trucks Lowering the Body with Engine Stopped
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Plate Locations and Film Locations
Topcon® System Five Specifications
735B and 740B Articulated Trucks Fuel System - Prime
AP555E and BG555E Asphalt Pavers C4.4 Engine Supplement Air Aftercooler - Remove and Install
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 02
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 09
735B and 740B Articulated Trucks Fuel Tank Cap and Strainer - Clean
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System MID 053 - CID 1089 - FMI 14
C27 and C32 Engines for Caterpillar Built Machines Exhaust Pipe
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Remove
735B and 740B Articulated Trucks Hydraulic Tank Breather - Replace - Hoist/Brake/Steering
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel System Secondary Filter - Replace
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Install
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Lift Cylinder
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.