AccuGrade® Grade Control System For Skid-Steer Loader, Multi-Terrain Loader and Compact Track Loader Caterpillar

Flash the Components

Perform the following procedure in order to flash program the system components. The system components are flashed in order to upgrade the software. The new software will allow the system components to communicate with the ECM and each other. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the system components. The following procedure is used in order to flash software into the system components.

1. Connect the 196-0055 Data Link Cable between the 275-5120 Communication Adapter and Cat ET.

2. Connect the 207-6845 Data Link Cable between the 171-4400 Communication Adapter and the diagnostic connector of the machine.

3. Use WinFlash in order to load the software.

   Note: Flash programming is NOT allowed if the engine is running, or the machine is moving.