Usage:
(1) Torque for the terminal nuts ... 30 ± 3 N·m (22 ± 2 lb ft)
(2) Torque for the screws that hold the nose housing to the lever housing ... 20 ± 2 N·m (15 ± 1 lb ft)
Clearance between the pinion and housing (pinion clearance) ... 8.3 to 9.9 mm (.33 to .39 in)
8C3593 (9N0721) 24V
Rotation as seen from the drive end ... Clockwise
No load conditions:
Speed (rpm) ... 6650 ± 1150
Current (amps) ... 100 to 170A
Voltage ... 11V
7T0796 (3T2650) 24V
Rotation as seen from the drive end ... Clockwise
No load conditions:
Speed (rpm) ... 7250 ± 1750
Current (amps) ... 70A
Voltage ... 23V
7T0795 (3T2650) 24V
Rotation as seen from drive end ... Clockwise
No load conditions:
Speed (rpm) ... 5500 minimum
Current (amps) ... 140A maximum
Voltage ... 24V
(1) Intermediate housing.
(2) Bracket.
(3) Torque for small solenoid terminal nuts ... 2.25 ± 0.25 N·m (20 ± 2 lb ft)
(4) Torque for large terminal nuts ... 30 ± 3 N·m (22 ± 2 lb ft)
(5) Bolt. Tighten to a torque of ... 7 to 10 N·m (5 to 7 lb ft)
The pinion clearance is correct when the solenoid position (dimension X) is 62.50 + 0.20 - 0.50 mm (2.46 + .008 - .020 in) from intermediate housing (1). The following procedure is used to adjust the solenoid position:
a. Loosen bolts (5) and move the solenoid until distance (X) is correct. Bracket (2) has elongated holes.
b. Tighten bolts (5) after the adjustment is correct to a torque of ... 7 to 10 N·m (5 to 7 lb ft)